开云体育

I created a board wich uses two different drills for vias: 50/28 and
32/16 but when i create the drill file i have to specify one drill and
is the one it uses.
Is there any way to generate the drill file with the two sizes that i
used to create the board?

Thanks a lot!

Sorry i insist, but i need to make this board, and this is the only thing that stop me.
It may be a way to change the via drills by hand on the drl file???
Please, any help will be appreciated!!!


Saludos, Juan Pablo.

--
Juan Pablo Daniel Borgna -- Tcnico Electrnico
INTI-Electrnica e Informtica
Direccin: Avenida General Paz 5445 entre Albarellos y Constituyentes
CC157 (CP B1650KNA) San Martn, Bs. As., Argentina TE:+(5411)4724-6200

JPD Borgna a écrit :

I created a board wich uses two different drills for vias: 50/28 and
32/16 but when i create the drill file i have to specify one drill and
is the one it uses.
Is there any way to generate the drill file with the two sizes that i
used to create the board?

The very last release candidate i have uploaded
(kicad-release_candidate-2005-10-04.tgz or .zip) has an experimental
feature to do it.
The Pop up menu (on a via) allow you to enter an alternate drill value
for this via.
This alternate value can be "exported" to other vias which have the same
size.
You can have many alternates values.
The default value is used for all the via which have no alternate driil
value

Be aware this is an experimental feature, not very well tested.
In "preference menu" is added an option to show the via holes.


JP Charras