Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Different via holes
|
JPD Borgna
I created a board wich uses two different drills for vias: 50/28 and 32/16 but when i create the drill file i have to specify one drill and is the one it uses.
Is there any way to generate the drill file with the two sizes that i used to create the board? Thanks a lot! When I solve this I send it to my manufacturer and in two to three week I'll be able to use it! And then put it on-line. Its a SpartanII FPGA prototyping board. Saludos, Juan Pablo. -- Juan Pablo Daniel Borgna -- Tcnico Electrnico INTI-Electrnica e Informtica Direccin: Avenida General Paz 5445 entre Albarellos y Constituyentes CC157 (CP B1650KNA) San Martn, Bs. As., Argentina TE:+(5411)4724-6200 |
|
Ehlers, William \(ES\)
开云体育I
cannot reach the FTP site. I can get to all the other board house and the like
that I access via FTP. Is there some kind of setting/password thing that is
needed?
Are
you going to put the new files on the HTTP site?
?
W. Ehlers San Jose, Ca
From: kicad-users@...
[mailto:kicad-users@...] On Behalf Of JPD
Borgna 32/16 but when i create the drill file i have to specify one drill and is the one it uses. Is there any way to generate the drill file with the two sizes that i used to create the board? Thanks a lot! When I solve this I send it to my manufacturer and in two to three week I'll be able to use it! And then put it on-line. Its a SpartanII FPGA prototyping board. Saludos, Juan Pablo. -- Juan Pablo Daniel Borgna? --? Técnico Electrónico INTI-Electrónica e Informática Dirección:? Avenida General Paz 5445 entre Albarellos y Constituyentes CC157 (CP B1650KNA) San Martín, Bs. As., Argentina TE:+(5411)4724-6200 |
|
Tonamiben
This is where I just downloaded the files.
toggle quoted message
Show quoted text
ftp://www.lis.inpg.fr/uploads/kicad/Release_Candidate/ Benoit Ehlers, William (ES) wrote: I cannot reach the FTP site. I can get to all the other board house and the like that I access via FTP. Is there some kind of setting/password thing that is needed? |
|
Ehlers, William \(ES\)
开云体育Thanks
but no luck seeing the FTP site. I was informed by IT that access is only
allowed to approved ftp sites and I doubt if the KICAD site is approved so I
guess I'll wait until it gets transferred or I guess I can do it from
home.
?
Thanks again
?
W.
Ehlers? San Jose, Ca From: kicad-users@... [mailto:kicad-users@...] On Behalf Of Tonamiben Sent: Tuesday, September 27, 2005 9:05 AM To: kicad-users@... Subject: Re: [kicad-users] Different via holes ftp://www.lis.inpg.fr/uploads/kicad/Release_Candidate/ Benoit Ehlers, William (ES) wrote: > I cannot reach the FTP site. I can get to all the other board house > and the like that I access via FTP. Is there some kind of > setting/password thing that is needed? > Are you going to put the new files on the HTTP site? >? > > W. Ehlers > > San Jose, Ca > > ------------------------------------------------------------------------ > > *From:* kicad-users@... > [mailto:kicad-users@...] *On Behalf Of *JPD Borgna > *Sent:* Tuesday, September 27, 2005 7:43 AM > *To:* kicad-users@... > *Subject:* [kicad-users] Different via holes > > I created a board wich uses two different drills for vias: 50/28 and > 32/16 but when i create the drill file i have to specify one drill and > is the one it uses. > Is there any way to generate the drill file with the two sizes that i > used to create the board? > > Thanks a lot! > > When I solve this I send it to my manufacturer and in two to three week > I'll be able to use it! And then put it on-line. Its a SpartanII FPGA > prototyping board. > > > Saludos, Juan Pablo. > > -- > Juan Pablo Daniel Borgna? --? Técnico Electrónico > INTI-Electrónica e Informática > Dirección:? Avenida General Paz 5445 entre Albarellos y Constituyentes > CC157 (CP B1650KNA) San Martín, Bs. As., Argentina TE:+(5411)4724-6200 > > > > SPONSORED LINKS > Open source software > <> > ????? Computer software program > <> > ????? Hints > <> > > Open source > <> > > > > ------------------------------------------------------------------------ > YAHOO! GROUPS LINKS > >???? *? Visit your group "kicad-users >?????? <>" on the web. >??????? >???? *? To unsubscribe from this group, send an email to: >??????? kicad-users-unsubscribe@... >?????? >??????? >???? *? Your use of Yahoo! Groups is subject to the Yahoo! Terms of >?????? Service <>. > > > ------------------------------------------------------------------------ > |
to navigate to use esc to dismiss