开云体育

I really feel the selectable grids(schematic capture) should be in
proportion to each other. Presently it is 50, 20, 10,5 etc. So if one
is using a grid of 20, and then switches to 50(which exists in most
symbols ) the cursor now cannot snap to the items! The grid should be
50,25,12.5,6.25 etc.
This may look ugly, but it can be shown as x(50), x/2, x/4, x/8, which
makes sense since Kicad internally uses inches, for which this is the
usual convention (1/4,1/8 etc).

--Royce.