Route track with error ?

Lctech Lctech #24315 Hello, I have a problem with manual but also automatic route track design. As in the attachments, the design rule checker shows some errors. I tried sofar to change the values of the erroneous space in net class of the Board Configuration. Error still persists. Could I try something else ? Thank you. Regards, toggle quoted message Show quoted text On Mon, Dec 30, 2024, 11:20 Lctech Lctech <lctech3000@...> wrote: Hello, I have a problem with manual but also automatic route track design. As in the attachments, the design rule checker shows some errors. I tried sofar to change the values of the erroneous space in net class of the Board Configuration. Error still persists. Could I try something else ? Thank you. Regards, p4.jpg p2.jpg p3.jpg p1.jpg
Robert All Messages By This Member #24316 To me it looks like pins 3 and 4 of SW1 are not connected to anything in the schematic, and therefore shouldn't be connected to anything on the PCB. If SW1 is one of those where 1 and 4 are connected internally, and 2 and 3 are connected internally, you still have to have all four pins on the schematic. A convenient way to do this would be to create a switch symbol with pin 4 overlaid on pin 1, and pin 3 overlaid on pin 2. That way your switch only appears to have two pins on the schematic, but on the PCB it has all four, with the internal connections automagically present (you still have to connect the internally connected pins with tracks, as you appear to be attempting to do). Regards, Robert * Plain text email - safe, readable, inclusive. * -- This email has been checked for viruses by Avast antivirus software. www.avast.com
Andy All Messages By This Member #24317 You don't seem to have any holes in the pads you may also find it easier to see if you turn off the outline mode ANdy On Mon, 30 Dec 2024 11:23:38 +0100 "Lctech Lctech via groups.io" <lctech3000@...> wrote: Hello, I have a problem with manual but also automatic route track design. As in the attachments, the design rule checker shows some errors. I tried sofar to change the values of the erroneous space in net class of the Board Configuration. Error still persists. Could I try something else ? Thank you. Regards, On Mon, Dec 30, 2024, 11:20 Lctech Lctech <lctech3000@...> wrote: Hello, I have a problem with manual but also automatic route track design. As in the attachments, the design rule checker shows some errors. I tried sofar to change the values of the erroneous space in net class of the Board Configuration. Error still persists. Could I try something else ? Thank you. Regards,
Lctech Lctech #24318 Thank for the answers. I solved it by deleting the switch footprint and adding a new one with fewer connections (2). The Rule Checker was free of errors. Regards, toggle quoted message Show quoted text On Mon, Dec 30, 2024, 12:40 Andy via <andygio=[email protected]> wrote: You don't seem to have any holes in the pads you may also find it easier to see if you turn off the outline mode ANdy On Mon, 30 Dec 2024 11:23:38 +0100 "Lctech Lctech via " <lctech3000=[email protected]> wrote: > Hello, > > I have a problem with manual but also automatic route track design. > > As in the attachments, the design rule checker shows some errors. I tried > sofar to change the values of the erroneous space in net class of the Board > Configuration. > > Error still persists. Could I try something else ? > > Thank you. > > Regards, > > On Mon, Dec 30, 2024, 11:20 Lctech Lctech <lctech3000@...> wrote: > > > Hello, > > > > I have a problem with manual but also automatic route track design. > > > > As in the attachments, the design rule checker shows some errors. I tried > > sofar to change the values of the erroneous space in net class of the Board > > Configuration. > > > > Error still persists. Could I try something else ? > > > > Thank you. > > > > Regards, > >? > > > > >

Previous Topic Next Topic

开云体育

Route track with error ?