开云体育

It would be helpful if you said what version you're using. I'm using 8.0.5 and the Pin Length is still there in both the Pin Table and the Properties panel of each pin.

开云体育

What OS and version are you using? We need more data.

I noticed it starting from 8.0.4, and continuing in 8.0.5.? Moreover, I just checked my second computer,

with KiCAD 8.0.5 installed, the pin length column does not exist as well.

-- 
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying

开云体育

I noticed it starting from 8.0.4, and continuing in 8.0.5.? Moreover, I just checked my second computer,

with KiCAD 8.0.5 installed, the pin length column does not exist as well.

I'm on Linux. As you can see, everything is fine here. Must be something with your installation. Perhaps you can share your screenshots.








--
Regards,
Tony

It is there on KiCad 8.0.5 on W10.

开云体育

I use W10 on one PC and W11 on the other.

?

The "Pin properties" is Ok, the problem is only with the "Pin table".

Try this:

1. With the Pin Table visible, right-click anywhere on the column header row.
2. You should get a checklist of columns to make visible.
3. There are 14 available columns - some are not enabled by default.
4. Enable "Length".

You should now be fixed.

--
Regards,
Tony

开云体育

I checked on my installation, but the PinTable is missing the Y-Position column (see attached image) :-)
Something is wrong....

KiCad v8.0.5, release build on Windows 10

Regards,

Peter

Please see message? #25275

开云体育

On 10/10/2024 06:00, Varuzhan Danielyan wrote:

I use W10 on one PC and W11 on the other.

?

The "Pin properties" is Ok, the problem is only with the "Pin table".

Try this:

1. With the Pin Table visible, right-click anywhere on the column header row.
2. You should get a checklist of columns to make visible.
3. There are 14 available columns - some are not enabled by default.
4. Enable "Length".

You should now be fixed.

Like this: