开云体育

Adilson Oliveira wrote: Hello. We had the same problem. The linux version of kicad is completely statical. Thats why its so heavy. We compiled from the sources and dinamic link it and then it

The server: iut-tice.ujf-grenoble.fr/cao/ is accessible for downloading both in ftp or http mode (some users have problems in ftp

Hello. I've been playing a bit with the Kicad sources yesterday but something wasn't very clear to me: does the 3D visualization use the hardware acceleration? I do have it on my machine (NVidia) but

Good afternoon. My name is Adilson Oliveira and I'm a software developer for NoMachine (http://nomachine.com). Despite I do software for living, I started my carrer as an eletronics designer and

Thanks and by the way an excellent job on the software. It took me the better part of Saturday to go from concept to PCB. No other program I have used is this fast and easy to use. W. Ehlers San

Hi, I tried to create a zone that I filled with copper. It work good except when there is 45 deg. angles, where the pour appear as stair steps. I was able to modify it in the gerber file by adding a

Thanks but no luck seeing the FTP site. I was informed by IT that access is only allowed to approved ftp sites and I doubt if the KICAD site is approved so I guess I'll wait until it gets transferred

This is where I just downloaded the files. ftp://www.lis.inpg.fr/uploads/kicad/Release_Candidate/ Benoit Ehlers, William (ES) wrote:

I cannot reach the FTP site. I can get to all the other board house and the like that I access via FTP. Is there some kind of setting/password thing that is needed? Are you going to put the new files

I have uploaded a new version of kicad, on ftp servers, in Release_Candidate directory.. Because there are many changes, it is a release candidate only. See (in this directory) "new.txt" and

I created a board wich uses two different drills for vias: 50/28 and 32/16 but when i create the drill file i have to specify one drill and is the one it uses. Is there any way to generate the drill

jean-pierre charras - INPG wrote: kevinerdmann a écrit : I have read the manual about building a part in eeschema but for some reason I cannot move multiple pins. Is there some way to

Great to hear it! Yahoo! pierre.charras@i...> wrote: >

I created a module with some segments in the drawings layer. When tracing the gerber i found that the texts (of this module, T0 T1 fields) are put in this layer too! but the most strange thing is

kevinerdmann a écrit : I have read the manual about building a part in eeschema but for some reason I cannot move multiple pins. Is there some way to move multiple pins or a group of pins at the

I have read the manual about building a part in eeschema but for some reason I cannot move multiple pins. Is there some way to move multiple pins or a group of pins at the same time? If not could

Royce Pereira wrote: Hi, Thats OK I guess. I do the same to make a slot in my PCB. Thanks! I forgot the attach. My manufacturer says that its ok to do that. Saludos, Juan.

Hi, Thats OK I guess. I do the same to make a slot in my PCB. --Royce. of a if my Constituyentes 6200

Hi! I want to put a rectangular hole for soldering a the metallic case of a sliding switch to the board. How do you (any of you) would do this? Ive solved with overlapping some rectangular pads, but i

It would be nice to get rid of the bubbles at the end of the pins in the component symbol(schematic), once the connection has been made. The bubbles will then serve as an indication of an