开云体育

Hello Everyone, I am new here and I am very glad that Mr. Charras and his supporters created this very good Open Source Program. So far is the best open source electronic design program I have seen.

Edouard Greiffiths wrote: I think thinner is bad. if a fill is made of smaller than the minimum trace width allowed by your pcb manufacturer then there will be problems. I know that protel dxp can

Yeah, I think this is due to the fact that the fill zone is constituted of edge to edge segments and the program does not allow you to go below a certain segment thickness (you can choose it in the

Edouard Greiffiths wrote: Hi, Thank you for the try I looked at the corrected board and still, there is a thinner but present stairs pattern. It is only a crossing of horizontal and vertical

Edouard Greiffiths wrote: nice! I have just compiled it with today's release canidate. Certainly and improvement. This makes my life easier; I'm using a CNC mill to make boards and the smoother the

R. Michael Sharkey escreveu: Hi. It actually does a very nice job indeed. I did some quick tests here and the results are great. Now, if we found a way to do the same with the component symbols as

Hello List, I have posted the relevant files in the "F4EXB" folder in the files section. This fix makes nicer contours for the fill zone, at least that's what I think, let me (and the List) know

Bingo! This fixed the problem. Now the contours of the fill zone look much nicer (smoother). I think we still miss the trimming of spurs to make it really good for practical etching at least with

I have uploaded a new release candidate on both kicad servers. This is a bug fix release. -- Jean-Pierre CHARRAS Ma?tre de conférences Directeur d'études 2ieme année. Génie

Well I think I've got it. You need to tell the compiler where to find setup.h and it is not in the paths given. So you need to amend line #327 of makeg95.env (in the 2005-08-29 version) in the main

mrbeokay wrote: you could also use the 'net highlight' tool. This took me forever to figure out actually. I would expect some option in the Fill dialog to select a net to connect to. -ryan

wrote: Thanks that did the trick. I missed that function in the popupmenu because its only available before one starts drawing the fill edges. Arjan

Hello, I get a bunch of the following messages (here for gerbview): Doudou@SEMPER /d/Programs/kicad-dev/gerbview $ make -f makefile.g95 g++ -c -DWINVER=0x0400 -D__GNUWIN32__

Royce Pereira wrote: In pcbnew select Miscellaneous/Global Deletions and in the dialog that pops up check the 'delete tracks' option then click the Accept button. HTH Ian -- Ian T-Bell aka

Hi all, How does one unroute a board that has been routed (in my case, automatically)? Thanks, --Royce.

Hello list, I have an update on this since I went a little bit further in examining the code and playing around with the fill zone function. It seems to me that the problem could come from the fact

Hi, I think that while in the fill zone mode you move the pointer inside the track, right click and choose "select net". Then you can do "fill zone" from anywhere outside the track.

Hello List, I started using Kicad a few weeks ago and it seems a good program with very high potential. Very good work mr Charras. Befor I used an older comercial product, ultiboard but this had

[clip] I just uploaded "exp-kicad-lib.ulp" under the rm_sharkey_libs folder int he files section of the group. This is a ULP script to export EAGLE PCB parts to KiCAD. To use, open EAGLE PCB, load

Adilson Oliveira wrote: That' one of the reasons for this group, to do just this sort of thing. We would end I have done a quick search on the web and it seems there are lots of free Orcad libraries