开云体育

When the add-in is installed, a new button appears in the toolbar in pcbnew. When you press that button, it produces the Gerbers and Excellon files, zips them up and uploads the zip to PCBWay and

Well, I tried again, and it installed. Now what? I have the Gerbers and drill file in a ZIP, but no information about how to send it to PCB-New to get a quote. -- This email has been checked for

Thanks, Tony. Who would guess to do that? I will try again. -- This email has been checked for viruses by AVG antivirus software. www.avg.com

In KiCad 'Plug in and content manager', there is a plug in link to PCB-WAY, but it seems not to work.

No. It still works. Did you forget to press the [Apply Pending Changes] button? -- Regards, Tony

Sorry, but I do not understand what you mean for "PC-WAY install". Just visit the site at this link: *https://www.pcbway.com/ <https://www.pcbway.com/>* and you'll find everything you need

I usually get swift responses to my questions, but I didn't see a response to this one. Has the link to PCB-WAY been discontinued?

I am trying to use the PCB-WAY button. When I try to 'install' I get 'install pending' but nothing more happens. Please advise. -- This email has been checked for viruses by AVG antivirus

Most PCB fabs will remove this anyway. If you don't want to leave it to them, KiCad can do it for you: File > Fabrication Outputs > Gerbers > Gerber Options > Subtract soldermask from silkscreen ==>

JLCPCB do not put silkscreens on solder pads, so it is not a matter in this case. Just it will not apear on the pcb. Jean-Paul **** Jean-Paul Gendner 03 88 27 03 44 Site : f5bu.fr

Good point. Thanks. -- OOO - Own Opinions Only Best Wishes John Woodgate Keep trying

As other have said it's really down to you. The only thing to watch out for is silk screen on the actual solder pads which you don't want to happen. Andy "John Woodgate" <jmw@...> wrote:

Sounds good. Thanks. -- This email has been checked for viruses by AVG antivirus software. www.avg.com

In addition to signifying required mechanical clearance (+placement tolerance), the courtyards can also account for the "shadowing" by tall components. This mostly affects PCBs with SMDs that will

For your conscience, you could always disable the courtyards error checking: File > Board > Design Rules > Design for Manufacturing > Courtyards overlap ==> Ignore -- Regards, Tony

Thank you very much.

Hello, Regarding courtyards overlapping, only you can know if there is enough space to place your components taking into account their actual sizes. Regarding the silkscreens overlapping, it is an

Can I safely ignore 'errors' abut courtyards overlapping and 'warnings' about silkscreens (the outlines of components) overlapping? Some courtyards are quite a lot larger than the parts, and I don't

Found it!?? (yes, PCBNew). In the "objects" panel, references was unchecked. What confused me was that the indentation seemed to suggest it was relating to through-holes, as distinct from every

Hi, Iuse KICAD 5. Use this set up, work. [cid:06d7e4e0-65ff-4253-af1b-1e5cb48d0dc4] ________________________________ Da: [email protected] <[email protected]> per conto di Robert via