¿ªÔÆÌåÓý

  1. Jmriusers
  2. Topics

Locked Transfering

 

?
I down loaded the latest JMRI update on a newer laptop. I tried to transfer my Panels to the newer computer. When I ran the panel I got the message below. What am I doing wrong?

Parse error
while parsing file /C:/Users/P.%20j.%20Mattson/JMRI/RVR%208-2018-2.xml
Exception: org.jdom2.input.JDOMParseException: Error on line 3334: cvc-identity-constraint.4.1: Duplicate unique value [YELLOW SIG-5] declared for identity constraint "signalHeadUserName" of element "layout-config"
See http:jamri.org/help/en/package/jmri/configurexml/ErrorHandler.shtml for more information.

I went to this web site but it didn't help.?

PJ
 

It¡¯s saying that the panel file has two SignalHeads defined with the same user name "YELLOW SIG-5¡±.

The most straight-forward way to resolve this, I think, is to
*) Set JMRI Preferences -> Startup Items to run the "jython/TurnOffXmlValidation.py¡± script _before_ loading your file. That¡¯ll let it go past the error.
*) Load your file, fix the error, save a new file
*) Them remove the script, because that validation step is protecting you against bad things and bypassing it could well result in future trouble.

Bob

On Aug 11, 2018, at 1:34 AM, pjmattson@... wrote:


I down loaded the latest JMRI update on a newer laptop. I tried to transfer my Panels to the newer computer. When I ran the panel I got the message below. What am I doing wrong?

Parse error
while parsing file /C:/Users/P.%20j.%20Mattson/JMRI/RVR%208-2018-2.xml
Exception: org.jdom2.input.JDOMParseException: Error on line 3334: cvc-identity-constraint.4.1: Duplicate unique value [YELLOW SIG-5] declared for identity constraint "signalHeadUserName" of element "layout-config"
See http:jamri.org/help/en/package/jmri/configurexml/ErrorHandler.shtml for more information.

I went to this web site but it didn't help.

PJ
--
Bob Jacobsen
rgj1927@...
 

I did as you said and now things are OK to a point. Now the CMRI sensors are not working. I went to the Preferences ¨C Default and all but the Command Station was checked under Internal. I tried to change them to CMRI but it wouldn¡¯t let me change them. What am I doing wrong???
 

Bump for pjmattson.
Wouter

On Mon, 13 Aug 2018 at 20:16, <pjmattson@...> wrote:

I did as you said and now things are OK to a point. Now the CMRI sensors are not working. I went to the Preferences ¨C Default and all but the Command Station was checked under Internal. I tried to change them to CMRI but it wouldn¡¯t let me change them. What am I doing wrong???

1 - 4 of 4