Quick details:

?

5 ports designated in config… Loconet (Com4), Loconet2 (Com5), Loconet3 (virtual), Programmer (COM6), Command Station (COM3).

?

When trying to program/read with DecoderPro, it always goes to the Command Station. Configuration is set for both programming options assigned to the PR3 (Programmer). All other options assigned to CS.

?

Programmer is connected to computer via USB (Com6) and also to Loconet from command station. All other Loconets are set up via USB connections for secondary Loconet via LocoBuffer-USB’s. No combination of USB or LocoNet connections will affect operation of the PR3. When I first start up Panel/DecoderPro, the Program LED on the Command Station begins rapidly flashing red. I CAN still do the quick programming option through the DT602D throttle. Engines will read into DecoderPro on the programming track connected to the DCS210A+.

?

I’m at a loss here. Anyone have a solution? Thanks!!!

Jim Duncan

?

73 de Jim, KU0G

Warrensburg, MO

EM28rs

?