开云体育

  1. Jmriusers
  2. Topics

Locked One brave sole

Al Silverstein
 

Bob,

I made my first attempt to using Decoder Pro. The attempt failed. Here are the steps I took.

I downloaded Java 2 plug in from the Sun site. It was version 1.4.0_01. I installed it on the same machine I am currently running Winlok 2.1e successfully from com1.

I downloaded Decoder Pro 0.9.3.3 and installed it on the very same machine.

I am currently using a MS100. My system is a Dell GX1, P600, 256MB Ram and plenty of HD space.

When I tried to launch DP I received the message "Failed to set the current baud rate for the MS100. Port is set to 9600baud. See readme file for more info. The baud rate is grayed out at 16600.

What did I do wrong.

Al
Jon Miller
 

Al,
At the current time you need a LocoBuffer. Bob is still working on the
MS100 interface. Find out about it in the files section of the Loco_Net
Hackers group on Yahoo.
A lot of work for Bob to do and the ability to use the MS100 is on his
list. The LocoBuffer is really a better device anyway.

Jon Miller
AT&SF
For me time has stopped in 1941
Digitrax DCC owner, Chief system
NMRA Life member #2623
Member SFRH&MS
Al Silverstein
 

Jon,

I already own a LocoBuffer. I just never assembled it yet. I was under the impression that Decoder Pro worked with MS100 also. I guess I will have to take the time tomorrow to put together the LocoBuffer.

Al

----- Original Message -----
From: Jon Miller
To: jmriusers@...
Sent: Friday, June 28, 2002 11:26 PM
Subject: Re: [jmriusers] One brave sole


Al,
At the current time you need a LocoBuffer. Bob is still working on the
MS100 interface. Find out about it in the files section of the Loco_Net
Hackers group on Yahoo.
A lot of work for Bob to do and the ability to use the MS100 is on his
list. The LocoBuffer is really a better device anyway.

Jon Miller
AT&SF
For me time has stopped in 1941
Digitrax DCC owner, Chief system
NMRA Life member #2623
Member SFRH&MS


To unsubscribe from this group, send an email to:
jmriusers-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
 

At 11:08 PM -0400 6/28/02, Al Silverstein wrote:

When I tried to launch DP I received the message "Failed to set the current baud rate for the MS100. Port is set to 9600baud. See readme file for more info. The baud rate is grayed out at 16600.
Jon's already replied, but I thought I'd add my apologies that it's taken so long to get this problem resolved. Until recently, I didn't have a PC readily available for testing on Windows. With my son's recent 10th birthday, I bought him a present (ahem) of a cheap PC that's currently resident in the train room. So now I'm learning Windows. The first project is the installer, and next I start on the MS100 baud-rate problem.

Thanks for your patience. I really do want to get all this resolved before the NMRA convention next month.

Bob

--
--------------
Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax 510-495-2957)
Am working off a huge email backlog, call if it's urgent.
Al Silverstein
 

Bob,

I have patients. I have waited this long. I can wait longer. What is a few more weeks if it works.

Al

----- Original Message -----
From: Bob Jacobsen
To: jmriusers@...
Sent: Saturday, June 29, 2002 2:32 PM
Subject: Re: [jmriusers] One brave sole


At 11:08 PM -0400 6/28/02, Al Silverstein wrote:
>
>When I tried to launch DP I received the message "Failed to set the
>current baud rate for the MS100. Port is set to 9600baud. See
>readme file for more info. The baud rate is grayed out at 16600.

Jon's already replied, but I thought I'd add my apologies that it's
taken so long to get this problem resolved. Until recently, I didn't
have a PC readily available for testing on Windows. With my son's
recent 10th birthday, I bought him a present (ahem) of a cheap PC
that's currently resident in the train room. So now I'm learning
Windows. The first project is the installer, and next I start on the
MS100 baud-rate problem.

Thanks for your patience. I really do want to get all this resolved
before the NMRA convention next month.

Bob

--
--------------
Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax 510-495-2957)
Am working off a huge email backlog, call if it's urgent.

To unsubscribe from this group, send an email to:
jmriusers-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

1 - 5 of 5