开云体育

I am trying to get to look at the MACROs from my Clubs Layout, but I thought I needed the internet to my Computer so I got the Clubs computer win11 with Java and Jmri on and I got the some results cannot find USB PORT 3 on both with most of the other options.

?

So this leads me to with or with out the Internet is not really needed, just to check if JMRI and JAVA are working, but mine not connected to the Internet as the Clubs laptop is up the other end of the Club room with Jmri/Java sorting out locos and CVs and other things ok.

?

I have used most of the options with the setup with the both computers, so what else do I need to do to be able to get to the Reading of the Macros.

?

Thanks Graeme

?

Depending on the computer and what is now or may ever have been plugged into it, the correct COM port may or may not be COM3.

?

To check which COM port you need to assign into JMRI, open Device Manager, expand the "Ports" branch, and plug/unplug your interface device. The correct COM port will appear/disappear as you do this (may take several seconds to do so).

?

HTH,

Steve

"Breezlys"

Hi Steve,

THANKS for your reply,

My computer details are showing me that the USB cable is connection to my COM 3, I go through all the DECODER PANEL settings an wait for a few section, only to have shown in RED.

I will have to wait till I get back to the CLUB and some ELECTRONIC EXPERTS there may be able to help me

?

Thanks Graeme