开云体育

Dispatcher and virtual sensors

Graham Orriss #149682 Hi All, I have changed from signal heads to signal masts.? My train goes around the loop in Dispatcher automatically but doesn't stop in the station as I want it too.? The 3 physical sensors show up on the?layout panel, as the train goes around, but not the internal sensors.? How do I set up the physical and internal sensors on the panel?anchor points,?so that it will follow the train around the blocks in red on the layout panel and stop in the station? Thanks again Graham
Roger Merritt All Messages By This Member #149683 Graham, ? ? There is a box in the New Train window that has the loco stop at the end.? ?The first section and last section of the transit should be the same for this feature. Roger
Steve_G All Messages By This Member #149685 Hi Graham If you are using internal sensors then you have to write logix to turn them on and off. Generally it can be made to work with an internal sensors between two external sensors, but I've never tried with multiple internal sensors in a row. Steve G. toggle quoted message Show quoted text ---------- Original Message ---------- From: "Graham Orriss via Groups.Io" <graham.orriss@...> Date: July 17, 2018 at 1:21 PM Hi All, I have changed from signal heads to signal masts.? My train goes around the loop in Dispatcher automatically but doesn't stop in the station as I want it too.? The 3 physical sensors show up on the?layout panel, as the train goes around, but not the internal sensors.? How do I set up the physical and internal sensors on the panel?anchor points,?so that it will follow the train around the blocks in red on the layout panel and stop in the station? Thanks again Graham
Graham Orriss #149693 Thanks Steve, As well as internal sensors working between two external sensors, will sections of track with internal sensors work between points?? Do you still have to write logix for these situations?? How do you write logix anyway?? Graham On ?Tuesday?, ?17? ?July? ?2018? ?21?:?49?:?07, Steve_G <RailRodder@...> wrote: Hi Graham If you are using internal sensors then you have to write logix to turn them on and off. Generally it can be made to work with an internal sensors between two external sensors, but I've never tried with multiple internal sensors in a row. Steve G. toggle quoted message Show quoted text > ---------- Original Message ---------- > From: "Graham Orriss via Groups.Io" <graham.orriss=[email protected]> > Date: July 17, 2018 at 1:21 PM > > > Hi All, > I have changed from signal heads to signal masts.? My train goes around the > loop in Dispatcher automatically but doesn't stop in the station as I want it > too.? The 3 physical sensors show up on the?layout panel, as the train goes > around, but not the internal sensors.? How do I set up the physical and > internal sensors on the panel?anchor points,?so that it will follow the train > around the blocks in red on the layout panel and stop in the station? > Thanks again > Graham > > >

Previous Topic Next Topic