开云体育

Bob,

No apology required. Like you, we all have many priorities in our
life. Sometimes those that rank highest aren't always the ones we'd
like to take on first.

Found a slight problem on the BDL16 Programming Screen. The buttons
are labelled "Read from PM4" and "Write to PM4" instead of "Read from
BDL16" and "Write to BDL16"

The Digitrax DZ121 appears to be listed in the wrong group? It has
BEMF, which cannot be addressed from it's current group. I've an
email around here somewhere that describes it's features. I'll try to
find it and post it for reference.

I've still a few other features to check out but so far so good.

Bob

Found a slight problem on the BDL16 Programming Screen. The buttons
are labelled "Read from PM4" and "Write to PM4" instead of "Read from
BDL16" and "Write to BDL16"

Thanks. That's the beauty of OO programs, you can reuse even the wrong things easily! I've fixed it.

The Digitrax DZ121 appears to be listed in the wrong group? It has
BEMF, which cannot be addressed from it's current group. I've an
email around here somewhere that describes it's features. I'll try to
find it and post it for reference.

Thanks. I was hoping to keep it in a separate group, as it does seem to have different behavior in some cases (writing CV1 comes to mind). The right solution seems to have separate file, but copy all the DH142, etc CV definitions into it. I'll do that.

You mentioned earlier that the DN122K2 also has BEMF. Do you know if that has the DZ121's program or is more like the DH142?

Bob
--
--------------
Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax 510-495-2957)

Bob B

You beat me to it. This may need it's own file, as it does funny
things when resetting certain CV's.
I have read this decoder's CV's using the DH140 definition, but
have not explored it past this.

Ron McKinnon
Wellington, New Zealand.