开云体育

  1. Jmriusers
  2. Topics

Adding Sensors Problem #nce #paneleditor

 

Hello All
After a year away im back into it,and starting to put layout into jrmi,thanks to all who devolop it.
?
I have added sensors before and had them working but this time not so good
Ihave all? NCE equipment,via usb all good there
?
I have added a basic Layout in Panel Editor ,added turnouts now onto sensors
I open sensor tab,give the sensor a name,in this case 4(aui01)and the input 6.
A green tick appears,but when i activate the sensor nothing shows
What step am i missing.I tried manually setting to active but didnt help.
?
Is it a case of not getting the right info to jrmi?
Thanks for your time
Brett
 

Brett,
?
On Panel Editor it is straight forward. I used the SIM profile because I'm too lazy to pull my Power Pro out (I can if need be)
First make sure that you can see your AIU and that its Cab Address is correct. Show Cab will query your Power Cab
Mine is blank because I am in Simulation mode. You should see Cab ID 4 for your AIU
?
?
You stated that you were able to add the Sensor. I used the 4:6 method and giving the name of 4(aiu06).
This is for Panel Editor not Layout Editor it has a different process.
The System Name is generated by JMRI and it will appear in the Add Sensor Panel automatically.
I added 2 indicators and you can see that they both work.
?
?
Layout Editor can give the same symptom but that's because we don't make the Block association assignment.
?
You Right Click on the Track segment select Edit , Create the Block Name ( I used BLK1)
Then make the assignment.
?
?
Once you make the assignments it will display.
?
?
Hopefully this helps
?
Inobu
?
?
?
?
?
 

Thankyou for expanation Inobu,will try today.Thats the step im missing.
 

oh my Silly Mistake,i have 2 Aiu of course mixed up the numbers.Apologies for wasting time
Brett

1 - 4 of 4