开云体育

I have an ESU command station with the following adapters:
1. LNET converter, Order number: 4
2. EcosDetectorStandard, Order number: 2
3. EsuExtention plugged into the Detector
4. EcosDetectorStandard, Order number: 3
5. EsuExtention plugged into the Detector
6. 5x Digitrax DS64

All are working correctly in the ESU Command Station.

I can control all the turnouts from Jmri but can not read the status of the Detectors boards.?

The table of sensors has one entry "US201:01"? but it seems its not active. Once that issue is resolved I also need to figure how to address the Extention boards...