开云体育

I have RailCom readers on my mainline tracks. All the turnout blocks are wired into the common block on the readers (I have two zones and two readers - DR5088RC's). I also have many LokSound decoders. The Lok Programmer (using their proprietary process) can read a LokSound decoder in just a few seconds. JMRI on the programming track takes about an hour and a half to read all CV's. Programming on the main with JMRI, I can go to the CV's page and I can read the values as fast as I can click on the button. I suspect it would be far faster to do a read full page on the main if it were enabled. Would it be possible to add an option to enable this.

I am aware that it would only apply to 1) Digitrax decoders with transponding enabled in a block where there is a transponding reader (BXP88, BXPA1, BDL168 with appropriate RX-4's) or 2) RailCom enabled decoders (as far as I know that includes only ESU and TCS decoders - there may be others) with an appropriate RailCom reader for the applicable blocks.

Should this be an option that users could enable??

Scott Walton

Scott
Digitrax Transponding does read full pages, read all sheets etc etc. So why railcom wouldn't I don't know.? I would have to borrow back my roco stuff to check that.
Steve G.

Scott
Using Roco I can read all / read sheet, but, I cannot read any indexed CV.
Steve G.

Then I wonder why all the "Read" buttons on the decoder page are grayed out. My JMRI is 5.3.3 on Windows 10 wiht Java 11.0.14. Anyone have an idea why that might be?

Scott Walton

ScottIf you are using a loconet connection is the "Transponding Present" in advanced options set to yes as per item 13 here?file:///home/sg/JMRI-Files/JMRI/help/en/local/index.html#package.apps.TabbedPreferences
Steve G.

Steve,

That link doesn't work. It points to your local harddrive.

file:///home/sg/JMRI-Files/JMRI/help/en/local/index.html#package.apps.TabbedPreferences

I assume you wanted the link below, but I'm not sure what on that page you are referring to:



---
Daniel Bergqvist
JMRI developer

2023-05-01 19:25 skrev Steve_G:

ScottIf you are using a loconet connection is the "Transponding
Present" in advanced options set to yes as per item 13 here
file:///home/sg/JMRI-Files/JMRI/help/en/local/index.html#package.apps.TabbedPreferences
Steve G.
Links:
------
[1] /g/jmriusers/message/216912
[2] /mt/98600213/5164497
[3] /g/jmriusers/post
[4] /g/jmriusers/editsub/5164497
[5] /g/jmriusers/leave/9097802/5164497/1706973714/xyzzy

Interesting
Its actually here?. Item 13.
Apparently the local version, got from "Window Help" never updates the URL doesntalways update the URL as you hunt and peck.
Steve G.