开云体育

Request for a little help please on panels and roster throttle.

Robert Schworm #169606 Hello, Can anyone suggest how to use one monitor with more than 1 panel? ?Is there a way to drop one panel and focus on another one, that is to say, to operate between 2 panels? In the Roster page, under labels and icons, there are a row of small squares labeled ON and OFF. ?You are suppose to be able to "drop" icons ( pictures?) on these squares. ?These show up on your function buttons in place of the words. ?For example a horn or a bell picture. ?Great, but can not find how to implement the dropping of these icons. ?Can anyone suggest how you physically maneuver and drop these icons? FYI the last column is a listing of radio buttons called "shunt". ?By selecting an unused button and enabling this button next to it, it alters your wii throttle from 1-100 to zero in the center and a bit of plus and minus on the throttle. ?Allows you to simply bump your speed needle up and down around "zero", for shunting your trains, which goes back to the Britts for decoupling and assembling train consists. Thanks Bob S
Dave Sand All Messages By This Member #169613 Bob, Can explain the panel question in more detail? ?Normally a click on a panel will bring it to front. ? Are the panels created using Layout Editor, Panel Editor or Control Panel Editor? ? Dave Sand toggle quoted message Show quoted text ----- Original message ----- From: Robert Schworm <rkschworm@...> To: [email protected] Subject: [jmriusers] Request for a little help please on panels and roster throttle. Date: Monday, February 17, 2020 4:57 PM Hello, Can anyone suggest how to use one monitor with more than 1 panel? ?Is there a way to drop one panel and focus on another one, that is to say, to operate between 2 panels? In the Roster page, under labels and icons, there are a row of small squares labeled ON and OFF. ?You are suppose to be able to "drop" icons ( pictures?) on these squares. ?These show up on your function buttons in place of the words. ?For example a horn or a bell picture. ?Great, but can not find how to implement the dropping of these icons. ?Can anyone suggest how you physically maneuver and drop these icons? FYI the last column is a listing of radio buttons called "shunt". ?By selecting an unused button and enabling this button next to it, it alters your wii throttle from 1-100 to zero in the center and a bit of plus and minus on the throttle. ?Allows you to simply bump your speed needle up and down around "zero", for shunting your trains, which goes back to the Britts for decoupling and assembling train consists. Thanks Bob S
rbucklew All Messages By This Member #169615 Bob S You can place more than one panel on the monitor, just leave parts of each visible so you can easily switch between them. My web site at shows the Conrail and Quaker Valley panels I have on a 21 inch touch screen monitor. Bob Bucklew toggle quoted message Show quoted text ----- Original Message ----- From: "Robert Schworm" <rkschworm@...> To: "jmriusers" <[email protected]> Sent: Monday, February 17, 2020 5:57:26 PM Subject: [jmriusers] Request for a little help please on panels and roster throttle. Hello, Can anyone suggest how to use one monitor with more than 1 panel? ?Is there a way to drop one panel and focus on another one, that is to say, to operate between 2 panels? In the Roster page, under labels and icons, there are a row of small squares labeled ON and OFF. ?You are suppose to be able to "drop" icons ( pictures?) on these squares. ?These show up on your function buttons in place of the words. ?For example a horn or a bell picture. ?Great, but can not find how to implement the dropping of these icons. ?Can anyone suggest how you physically maneuver and drop these icons? FYI the last column is a listing of radio buttons called "shunt". ?By selecting an unused button and enabling this button next to it, it alters your wii throttle from 1-100 to zero in the center and a bit of plus and minus on the throttle. ?Allows you to simply bump your speed needle up and down around "zero", for shunting your trains, which goes back to the Britts for decoupling and assembling train consists. Thanks Bob S
Lionel J. All Messages By This Member #169617 On Mon, Feb 17, 2020 at 11:57 PM, Robert Schworm wrote: Great, but can not find how to implement the dropping of these icons Hello; you must drop an image file (not drag and drop from a browser image window), use browser save to file feature, then drag and drop the saved file to the 'square', the image file will be copied in your JMRI preferences, no need to keep the original. Regards; Lionel
Dave Heap All Messages By This Member #169634 开云体育 Mike, On 19 Feb 2020, at 2:34 AM, Mike Heintzman <mikeheintzman@...> wrote: ‘?there are a row of small squares labeled ON and OFF.?’ Bob S is correct. They are for dropping replacement button icons. With your image files, I think you’re trying to drop them in the wrong place. Go to the Media page and you’ll see two squares. Drag and drop the image file to those squares. They are for large and small loco icons, not button icons. Dave in Australia
Doug Johnson All Messages By This Member #169707 Is there a set of standard images available for the buttons.? Would be nice to have some images for the sound locos' regards Doug

Previous Topic Next Topic