On Aug 30, 2019, at 1:18 PM, Peter Ulvestad <ulvestad@...> wrote:

Tim's console

019-08-30 13:43:26,456 util.Log4JUtil INFO - * JMRI log ** [main]
2019-08-30 13:43:26,456 util.Log4JUtil INFO - This log is appended to file: C:\Users\Tim\JMRI\log\messages.log [main]
2019-08-30 13:43:26,456 util.Log4JUtil INFO - This log is stored in file: C:\Users\Tim\JMRI\log\session.log [main]
2019-08-30 13:43:26,471 apps.Apps INFO - PanelPro version 4.16+R6f9aced starts under Java 1.8.0_221 on Windows 7 amd64 v6.1 at Fri Aug 30 13:43:26 BST 2019 [main]
2019-08-30 13:43:26,623 apps.Apps INFO - Starting with profile My_JMRI_Railroad.3ed9c7c2 [main]
2019-08-30 13:43:26,748 node.NodeIdentity INFO - Using 01e2399b-7d56-421c-946b-9196045968e1 as the JMRI storage identity for profile id 3ed9c7c2 [AWT-EventQueue-0]
2019-08-30 13:43:26,826 xml.AbstractSerialConnectionConfigXml INFO - Starting to connect for "LocoNet" [main]
2019-08-30 13:43:27,138 locobufferusb.LocoBufferUsbAdapter INFO - LocoBuffer-USB adapter set hardware flow control, mode=2 RTSCTS_OUT=2 RTSCTS_IN=1 [main]
2019-08-30 13:43:27,138 locobuffer.LocoBufferAdapter INFO - COM3 port opened at 19200 baud with DTR: true RTS: true DSR: true CTS: true CD: false [main]
2019-08-30 13:43:27,184 loconet.LnPacketizer INFO - lnPacketizer Started [main]
2019-08-30 13:43:27,530 loconet.LnPacketizer WARN - LocoNet message with opCode: f8 ended early. Expected length: 197 seen length: 2 unexpected byte: c8 [LocoNet receive handler]
2019-08-30 13:43:28,969 util.FileUtilSupport INFO - File path program: is C:\Program Files (x86)\JMRI\ [main]
2019-08-30 13:43:28,970 util.FileUtilSupport INFO - File path preference: is C:\Users\Tim\JMRI\My_JMRI_Railroad.jmri\ [main]
2019-08-30 13:43:28,971 util.FileUtilSupport INFO - File path profile: is C:\Users\Tim\JMRI\My_JMRI_Railroad.jmri\ [main]
2019-08-30 13:43:28,971 util.FileUtilSupport INFO - File path settings: is C:\Users\Tim\JMRI\ [main]
2019-08-30 13:43:28,971 util.FileUtilSupport INFO - File path home: is C:\Users\Tim\ [main]
2019-08-30 13:43:28,971 util.FileUtilSupport INFO - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main]
2019-08-30 13:43:29,515 loconet.LnPacketizer WARN - LocoNet message with opCode: c8 ended early. Expected length: 6 seen length: 3 unexpected byte: a0 [LocoNet receive handler]
2019-08-30 13:43:29,577 PanelPro.PanelPro INFO - Main initialization done [main]
2019-08-30 13:43:29,858 loconet.LnPacketizer WARN - LocoNet message with opCode: a0 ended early. Expected length: 4 seen length: 3 unexpected byte: fc [LocoNet receive handler]
2019-08-30 13:43:31,449 loconet.LnPacketizer WARN - LocoNet message with opCode: fc ended early. Expected length: 160 seen length: 2 unexpected byte: fe [LocoNet receive handler]
2019-08-30 13:43:31,496 loconet.LnPacketizer WARN - LocoNet message with opCode: fe ended early. Expected length: 32 seen length: 2 unexpected byte: ff [LocoNet receive handler]
2019-08-30 13:43:31,792 loconet.LnPacketizer WARN - LocoNet message with opCode: ff ended early. Expected length: 32 seen length: 2 unexpected byte: ff [LocoNet receive handler]
2019-08-30 13:43:32,666 loconet.LnPacketizer WARN - LocoNet message with opCode: ff ended early. Expected length: 160 seen length: 2 unexpected byte: ff [LocoNet receive handler]
2019-08-30 13:43:33,118 loconet.LnPacketizer WARN - LocoNet message with opCode: ff ended early. Expected length: 32 seen length: 2 unexpected byte: ff [LocoNet receive handler]


View Source




--
Peter Ulvestad

JMRI Users Group Moderator - ( )
Tam Valley Group Moderator - ( )
Sprog-DCC Group Moderator - ( )
Edmonton Model Railroad Association -

Please download and try JMRI 4.17.3

Bob

On Aug 30, 2019, at 4:19 AM, timj@... wrote:

Newbie here - and to JMRI completely stuck apologies in advance if I am being an idiot.

I have a LocoNet system (DCS100) with a load of devices attached. All working well and has been for years but I just can't get JMRI to respond to it.

Initially I tried with a pi4 running buster and a LocoBuffer-USB 'n' but it just didn't see any traffic - so then I swapped to a Loconet-II with same result. Then I swapped to a windows 7 Intel computer that I know can see LocoNet (as e.g. it runs traincontroller ok) via the LocoBuffer-II and again seeing nothing.

The setup seems ok, it picks up the right port but just see nothing at all on the traffic monitor - I note if i look at JMRI LocoNet-stats it says "raw-data" which i read elsewhere is indicative of problems but I don't know where to go next. Any suggestions very gratefully received as I feel like I am banging head against brick wall...

--
Bob Jacobsen
rgj1927@...

On 30 Aug 2019, at 20:34, dick bronson via Groups.Io <dick@...> wrote:

Tim,

Also after switching up to 4.17.3 be sure to get rid of that LocoBuffer-II option. That is a completely different item and will not work for you. You have a LocoBuffer-USB (Rev-n) and must select 'LocoBuffer-USB' in your preferences. What happened is that you got nabbed by a bug in JMRI 4.16. You are not being an idiot, so no apologies are required nor expected.

Dick :)

On 8/30/2019 2:21 PM, Bob Jacobsen wrote:

Please download and try JMRI 4.17.3

Bob

On Aug 30, 2019, at 4:19 AM, timj@... wrote:

Newbie here - and to JMRI completely stuck apologies in advance if I am being an idiot.

I have a LocoNet system (DCS100) with a load of devices attached. All working well and has been for years but I just can't get JMRI to respond to it.

Initially I tried with a pi4 running buster and a LocoBuffer-USB 'n' but it just didn't see any traffic - so then I swapped to a Loconet-II with same result. Then I swapped to a windows 7 Intel computer that I know can see LocoNet (as e.g. it runs traincontroller ok) via the LocoBuffer-II and again seeing nothing.

The setup seems ok, it picks up the right port but just see nothing at all on the traffic monitor - I note if i look at JMRI LocoNet-stats it says "raw-data" which i read elsewhere is indicative of problems but I don't know where to go next. Any suggestions very gratefully received as I feel like I am banging head against brick wall...

--
Bob Jacobsen
rgj1927@...