¿ªÔÆÌåÓý

  1. Jmriusers
  2. Topics

Locked JMRI 4.16, digitrax PR3 or PR4 Soundtraxx Tsunami

[email protected]
 

Greetings. I have started having problems with the Master Sound Level CV128 on SoundTraxx Tsunami2? decoders resetting to 1 or 0 when I try to test the sound installation using the trottle feature. Does any one out there have any suggestions? Win 10 , I have also tried 4.17 with the same results
 

Are you using a Digitrax PR3 or PR4 to do the programming? If so, see





where it talks about how those use CV128

Bob

On Aug 1, 2019, at 1:48 AM, jamestrigg@... wrote:

Greetings. I have started having problems with the Master Sound Level CV128 on SoundTraxx Tsunami2 decoders resetting to 1 or 0 when I try to test the sound installation using the trottle feature. Does any one out there have any suggestions? Win 10 , I have also tried 4.17 with the same results
--
Bob Jacobsen
rgj1927@...
 

¿ªÔÆÌåÓý

James,

Nothing new, I reported this a few years ago and Bob looked in to and his reference explains the why it happens.?

David Klemm
Xs Max

From: [email protected] <[email protected]> on behalf of jamestrigg@... <jamestrigg@...>
Sent: Thursday, August 1, 2019 1:48:02 AM
To: [email protected] <[email protected]>
Subject: [jmriusers] JMRI 4.16, digitrax PR3 or PR4 Soundtraxx Tsunami
?
Greetings. I have started having problems with the Master Sound Level CV128 on SoundTraxx Tsunami2? decoders resetting to 1 or 0 when I try to test the sound installation using the trottle feature. Does any one out there have any suggestions? Win 10 , I have also tried 4.17 with the same results

[email protected]
 

¿ªÔÆÌåÓý

That explains the problem. Would using Decoder lock ( cv15&16 ) prevent this?


On 1 Aug 2019, at 23:18, David Klemm <davidklemm7511@...> wrote:

James,

Nothing new, I reported this a few years ago and Bob looked in to and his reference explains the why it happens.?

David Klemm
Xs Max
From: [email protected] <[email protected]> on behalf of jamestrigg@... <jamestrigg@...>
Sent: Thursday, August 1, 2019 1:48:02 AM
To: [email protected] <[email protected]>
Subject: [jmriusers] JMRI 4.16, digitrax PR3 or PR4 Soundtraxx Tsunami
?
Greetings. I have started having problems with the Master Sound Level CV128 on SoundTraxx Tsunami2? decoders resetting to 1 or 0 when I try to test the sound installation using the trottle feature. Does any one out there have any suggestions? Win 10 , I have also tried 4.17 with the same results

James
 

folks, thanks for the explanation. Your assistance and advice is appreciated .

1 - 5 of 5