开云体育

I have created a mimic diagram of my eight track ladder sidings. I have added internal sensors (text type) to each siding and linked them to routes set up in JMRI. All works well with the status of a particular internal sensor depicted as "track open" (active) or "track closed" (inactive). Only one track can be selected at any one time ("track open"), the remaining tracks reverting to "track closed".
I want to activate (open) one of the tracks at JMRI startup. I have added the desired preset route name to the startup list. This works fine, with all turnouts showing the correct route, except that the status of the desired track sensor shows "<unknown>". All the other sensors show "track closed" as they should.?Clicking on the "unknown" sensor returns it to the correct active state of "track open".?Is there any way that I can force this to be active ("track open") via the startup routine?
JMRI version 1.8.0_131
Mac Mini OS X 10.9.5
NCE Procab

Thanks.

Derek.

If you have an NCE Power Pro system, don't use internal sensors. Use "Monitored" mode.

This reads NCE command station memory to return current turnout state and makes your mimic diagram track commands sent from NCE throttles as well.

No such facility with Power Cab or SB5 systems.
--
Dave in Australia