¿ªÔÆÌåÓý

  1. Jmriusers
  2. Topics

Locked engine runs by itself when connected to jmri and sprog

 

I placed an engine on the program track, connected to JRMI and the engine took off on its own.? I am using the SPROG for this purpose.? What is causing this to occur and how can it be fixed?
 

Jim,

? ? Turn off analog on the loco.

Roger
 

Thanks for the info, however how do you turn off the analog on the loco
Jim Volmer Sr


On Sun, Aug 12, 2018 at 4:31 PM Roger Merritt <merritt_roger@...> wrote:
Jim,

? ? Turn off analog on the loco.

Roger

 

Jim,

? ? The manual it came with should tell you.? Also DecoderPro will have info on it and you can change it there.

Roger
 

Jim

If you go to Decoder Pro and click on the loco in your roster and then click on basic there is a pane labeled Power Source Conversion.? Change this to NMRA Digital only and then write the change.? That should do it.

David


On Sunday, August 12, 2018 9:32 PM, Jim Volmer Sr <jimstarrpoint@...> wrote:


Thanks for the info, however how do you turn off the analog on the loco
Jim Volmer Sr


On Sun, Aug 12, 2018 at 4:31 PM Roger Merritt <merritt_roger@...> wrote:
Jim,

? ? Turn off analog on the loco.

Roger


 

Set CV 29 bit 2 to zero NMRA DCC Only.

Mark P Stamm
Mark at Euphoriatt dot Com

Sent from my mobile device

1 - 6 of 6