开云体育

Just wondering if anyone was here

sixth_rule #3 i got a couple questions and was wondering if anyone was actually there.
Dave Falkenburg All Messages By This Member #5 I'm here.. as is Bob... -Dave Falkenburg toggle quoted message Show quoted text On Tuesday, May 7, 2002, at 02:01 PM, sixth_rule wrote: i got a couple questions and was wondering if anyone was actually there. To unsubscribe from this group, send an email to: jmriusers-unsubscribe@... Your use of Yahoo! Groups is subject to
Bob Jacobsen All Messages By This Member #4 i got a couple questions and was wondering if anyone was actually there. I'm happy to help with questions, and there are other members who can help too. This Yahoo group is still pretty young, so hasn't gotten a lot of traffic yet. Note that there's a short delay in posting (perhaps as much as 12 hours, but usually shorter) because I've got this group set on "moderate new members". That's because other Yahoo groups have been being spammed recently. Once I'm convinced somebody is a real email address, I remove them from moderated status. Bob -- -------------- Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax 510-495-2957)
Jerry Drews All Messages By This Member #6 I'm here, Bob. I am not currently using jmri stuff, but am interested in following the progress. Count me in. Jerry Drews toggle quoted message Show quoted text -----Original Message----- From: Bob Jacobsen [mailto:Bob_Jacobsen@...] Sent: Tuesday, May 07, 2002 4:41 PM To: jmriusers@... Subject: Re: [jmriusers] Just wondering if anyone was here i got a couple questions and was wondering if anyone was actually there. I'm happy to help with questions, and there are other members who can help too. This Yahoo group is still pretty young, so hasn't gotten a lot of traffic yet. Note that there's a short delay in posting (perhaps as much as 12 hours, but usually shorter) because I've got this group set on "moderate new members". That's because other Yahoo groups have been being spammed recently. Once I'm convinced somebody is a real email address, I remove them from moderated status. Bob -- -------------- Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax 510-495-2957) To unsubscribe from this group, send an email to: jmriusers-unsubscribe@... Your use of Yahoo! Groups is subject to
Kenneth Meyer All Messages By This Member #106389 Bob, I'm a Mac OS X user (10.8.6) having trouble getting my C/MRI sensors to work on my PanelPro layout. It was working (but not anymore) on another Mac OS X (10.4.5) with no problems. I unplugged the serial adapter while running PanelPro and received an error message saying that "the serial adapter was disconnected". After that I could not get the sensors to display on the layout using 10.4.5. So, with a new Mac I though it was finally time to install everything on 10.8.6 but still no sensors are working on the panel layout. Can you suggest some trouble shooting that I might try. I'm not at all a techie but I do have some friends that could help. Model Railroading is Fun. Ken Meyer Bel Air, MD TinyURL.com - shorten that long URL into a tiny URL TinyURL.com - shorten that long URL into a tiny URL Preview of TinyURL.com/knpg6jb This TinyURL redirects to: howcase/86-modeling/237-ken-meyer-s-pennsylva nia-railroad-in-baltimore Proceed to this site. View on preview.tinyurl.com Preview by Yahoo
David Copson All Messages By This Member #106407 You may need to install a driver for your serial adapter on your new Mac. Walk Sacred, David Copson inyostudio.com Sent from my iPhone. Anything that doesn't make sense has been autocorrected. toggle quoted message Show quoted text On Jun 7, 2014, at 9:15 PM, "knmeyer@... [jmriusers]" <jmriusers@...> wrote: Bob, I'm a Mac OS X user (10.8.6) having trouble getting my C/MRI sensors to work on my PanelPro layout. It was working (but not anymore) on another Mac OS X (10.4.5) with no problems. I unplugged the serial adapter while running PanelPro and received an error message saying that "the serial adapter was disconnected". After that I could not get the sensors to display on the layout using 10.4.5. So, with a new Mac I though it was finally time to install everything on 10.8.6 but still no sensors are working on the panel layout. Can you suggest some trouble shooting that I might try. I'm not at all a techie but I do have some friends that could help. Model Railroading is Fun. Ken Meyer Bel Air, MD TinyURL.com - shorten that long URL into a tiny URL TinyURL.com - shorten that long URL into a tiny URL Preview of TinyURL.com/knpg6jb This TinyURL redirects to: howcase/86-modeling/237-ken-meyer-s-pennsylva nia-railroad-in-baltimore Proceed to this site. View on preview.tinyurl.com Preview by Yahoo
James LeFevre All Messages By This Member #106408 Yes you will need to install the correct mac drivers for your USB to serial device. Then you will need to go into the preferences file in JMRI and select the proper connection for the new device. JIm toggle quoted message Show quoted text On Jun 8, 2014, at 8:37 AM, David Copson david@... [jmriusers] <jmriusers@...> wrote: You may need to install a driver for your serial adapter on your new Mac. Walk Sacred, David Copson inyostudio.com Sent from my iPhone. Anything that doesn't make sense has been autocorrected. On Jun 7, 2014, at 9:15 PM, "knmeyer@... [jmriusers]" <jmriusers@...> wrote: Bob, I'm a Mac OS X user (10.8.6) having trouble getting my C/MRI sensors to work on my PanelPro layout. It was working (but not anymore) on another Mac OS X (10.4.5) with no problems. I unplugged the serial adapter while running PanelPro and received an error message saying that "the serial adapter was disconnected". After that I could not get the sensors to display on the layout using 10.4.5. So, with a new Mac I though it was finally time to install everything on 10.8.6 but still no sensors are working on the panel layout. Can you suggest some trouble shooting that I might try. I'm not at all a techie but I do have some friends that could help. Model Railroading is Fun. Ken Meyer Bel Air, MD TinyURL.com - shorten that long URL into a tiny URL TinyURL.com - shorten that long URL into a tiny URL Preview of TinyURL.com/knpg6jb This TinyURL redirects to: howcase/86-modeling/237-ken-meyer-s-pennsylva nia-railroad-in-baltimore Proceed to this site. View on preview.tinyurl.com Preview by Yahoo [Non-text portions of this message have been removed]
[email protected] #156009 Ouch!. How did this pop out of the drawer ?? 2002 and 2014 ... Funny, still the same questions 4 years later; driver for Mac. Marc
Cliff Anderson All Messages By This Member #156010 This thread popped up a couple of hours ago with a recent time-tag too, but only on the Topics list. After taking the bait, and scratching my head, I checked the Messages list to find nothing within the last forty-eight hours. Does 开云体育 have a bug, or is there something deeper hidden here? Cliff in Baja SoCal
John All Messages By This Member #156014 Cliff, Bug might be closer to you, I spend a lot of personal effort deleting posts from this group, thinking about asking for compensation payments. John toggle quoted message Show quoted text ---------- Original Message ---------- From: Cliff Anderson <cliffaa@...> Date: January 15, 2019 at 4:02 PM This thread popped up a couple of hours ago with a recent time-tag too, but only on the Topics list. After taking the bait, and scratching my head, I checked the Messages list to find nothing within the last forty-eight hours. Does 开云体育 have a bug, or is there something deeper hidden here? Cliff in Baja SoCal

Previous Topic Next Topic