¿ªÔÆÌåÓý

  1. Jmriusers
  2. Topics

Locked Signal Mast allocation on turnout: Error when trying to create an active train

 

I have created 6 turnouts on my layout. I have 6 physical signals and I have created 6 virtual signals.
I want to run my trains in one direction only so when I created signal masts for my turnouts, I only filled in the signal masts in the direction I need.?
?
When I tried to create an active train for a transit, I got following error:
?
Error: Section - SEC0 (IY:AUTO:0011) , 6 turnouts missing signals [AWT-EventQueue-0]
?
Does this mean I have to create signal masts for each and every leg of the turnout? (3 per turnout?)
(Also, my section SEC0 is connected to only 1 turnout but the above error mentions 6?)
?
--
+===============================
|. Vimal Parikh
+------------------------------------------
| JMRI version: 5.8+
| Java Version: 17.0.10
| Command Station: DCC-EX version 5.0.7
|.Host: MacBook Pro Sonoma 14.6.1
+===============================
 

Vimal,

In Dispatcher Options, do you have "Signal Head / SSL", "Signal Masts / SML" or "No Signals" selected?

Dave Sand


----- Original message -----
From: "tour-mayors.0e via groups.io" <tour-mayors.0e=[email protected]>
Subject: [jmriusers] Signal Mast allocation on turnout: Error when trying to create an active train
Date: Saturday, December 14, 2024 5:37 PM

I have created 6 turnouts on my layout. I have 6 physical signals and I have created 6 virtual signals.
I want to run my trains in one direction only so when I created signal masts for my turnouts, I only filled in the signal masts in the direction I need.?
?
When I tried to create an active train for a transit, I got following error:
?
Error: Section - SEC0 (IY:AUTO:0011) , 6 turnouts missing signals [AWT-EventQueue-0]
?
Does this mean I have to create signal masts for each and every leg of the turnout? (3 per turnout?)
(Also, my section SEC0 is connected to only 1 turnout but the above error mentions 6?)
?
--
+===============================
|. Vimal Parikh
+------------------------------------------
| JMRI version: 5.8+
| Java Version: 17.0.10
| Command Station: DCC-EX version 5.0.7
|.Host: MacBook Pro Sonoma 14.6.1
+===============================
 

¿ªÔÆÌåÓý

Vimal,

?

How did you add the masts to the panel? Did you use the right click on the turnout and ¡®Set signal masts¡¯ so it knows they are at that spot on the layout. If you just use the Layout Editor menu, that doesn¡¯t ¡®bind¡¯ it to that part of the track. Also you have to watch and make sure you pick the right boundary that the mast is attached. It is easy to get reversed if you don¡¯t read it carefully.

?

-Ken Cameron, Member JMRI Dev Team

?

?

1 - 3 of 3