开云体育

Dave, I could use the Excel script also. I have become the Computer Guy for a Group that did not understand JMRI (not that I fully understand it myself) or how software of any type works. The JMRI

Graham, How about a Google search "Arduino model trains". Just did a search, yup, loads of info out there. John

Hi Guys Just seen this topic, which is of interest as I'm hoping to look into using Arduinos to control sound and other functions around my layout.? Is there a way to get hold of the article that you

Friends, After being away from panel creation for a LONG time, I have been helping a friend prep his layout for signaling. Getting signals set up is not a problem. I can actually still do that. I like

Dave, Thanks for the confirmation. I am pleased to report that the “CHECK” tool is reporting no errors on any panel - Master and Sub-Panels (Lovations). I am waiting for John Wragg to get back to

Thanks both for the advice. I will have a play tomorrow and let you know how it goes.

Dave, I believe the two connection rule applies to other table types, including turnouts. Whenever making changes like this, save often and stop/start JMRI and look for errors in the system console.

Mark, Your report below has some encouraging things in it, so sorting what is actually wrong shouldn’t take too long. Your hardware clearly works, as SoundLoader does its stuff to the PR4. That’s

Jerry G, Thanks.? I would be interested in this article and future articles.? So let me/us know where you publish next.? As far as the NMRA, which I a member, I hadn't realized they weren't

Hi Graham, Thanks for the feedback, much appreciated. Problem 1. Regarding the parse error - no, it's not that important. The content of VSDecoderPreferences.xml is fine and it's doing the job. The

Mark, Pardon me if this seems like a dumb question. But after going through and changing all the parameters on the various sheets in Decoder Pro, are you then writing all changes to the locomotive? I

Dave, Thanks for the confirmation regarding the Blocks. What about the Turnouts? Dave Sent from my iPhone - Dave

Dave, Blocks with only 2 connections are not active and can be deleted. Dave Sand

Dave, Make sure that all of the entries in Layout Editor Tools >> Checks are resolved. If there have been a lot of block changes, go to the Blocks table and select Paths >> Delete Paths… from the

Hi Dave, I have found in the past that this issue isn’t limited to buffer stop signals. I’ve had to delete, save and re-add my track segments and blocks etc for it to “realise” what’s

I’ve noticed the same thing when I zoom out below 100%. The tracks at the bottom of the screen disappear. The labels are there, but no tracks. The tracks are a standard Mainline size.

You’re right. J uses the track length, not car counts. D’oh! Jon

Hi Mark, It sounds like you and I are on a similar path (although it seems like you didn't actually state what the problem is in your original post). I'm a DCC greenhorn too and I am using a windows 7

What seems to be going wrong? We should first track down what the problem actually is before giving advice, as otherwise you might end up doing (and perhaps breaking) all kinds of things not related

Hi I am wondering if anyone can help, I have a brand new MacBook Pro running Mojave and loaded with JMRI and Java. I would like to run a Merg CBUS system from the computer but cannot establish a