开云体育

Thanks Petr, will do. My question stems from optional <show> elements in Aspects definition: <appearance> <aspectname>Clear</aspectname> <show>green</show> <show>red</show> <reference></reference>

Thanks Steve I will run the debugging. Would a WireShark log be at all helpful? Dave

Dave, If the problem persists, it would be helpful if you could enable WiThrottle server debugging and post your session.log file after some of these crashes. Steps to enable this are here:

Hey Dave, Yes, that looks like a crash in a WiThrottle Server instance. Do you have several of those at nearly the same time, or are they at different times? Most recent Android versions try to use

Look at ?SD – Czechoslovak State Railways signaling https://www.jmri.org/help/en/html/tools/signaling/AspectSignaling.shtml States in СЭВ organization used common signaling system ОСЖД.

Hi, What would be the easiest way of adding colors to signalColorType? I want to create Signalling System for Russian railways, where blue is often used on dwarf signals for shunting. Regards Tim

Stephen, As Marc says, this is stored in our GitHub repository. That specific page is at: https://github.com/JMRI/JMRI/blob/master/help/en/html/doc/Technical/NetBeans.shtml For a simple change like

I believe you must get on GITHUB? JMRI and get the code, add to the code and then upload your changes for inclusion in JMRI. https://www.jmri.org/help/en/html/doc/Technical/Help.shtml Maybe there is

Hi All, I am new to this game. I would like to add a note to the jmri help page titled *** JMRI Code: Building with NetBeans *** Where do I find this file in jmri? Yours Sincerely Stephen Grant Brown

Since 4.18 I've been running the console all the time during my session and tonight with 6 smartphone throttles running there were repeated Engine Driver / WiTHrottle drop outs. Androids seemed to

John was able to supply me with a set of his operations files.? What we found is that one of his trains was building when the operation files were saved.? Only one train can build at a time, so when

I concur with Ross, All of my roster & the other necessary files live on Dropbox. I share it between my PC & Mac. Also, when a new version of JMRI comes out, I don't have to worry about losing

Mike, I suggest you take a look at “JMRI Setup: Sharing Files with Dropbox” https://www.jmri.org/help/en/html/setup/Dropbox.shtml You can use Dropbox (and other cloud services) to maintain a

I use all Apple stuff and Macs. Really simple with them. Just turn on time machine, select a drive somewhere on the network or attached to another computer on the network or to a network drive and

Marc, Yup, fixed by PR #8004, available in build #3621 or later. Once 4.19.3 is released I'll close issue #7998 ( https://github.com/JMRI/JMRI/issues/7998 ) Steve "Breezlys"

I have my Decoder Pro and JMRI Operations on my laptop. As I was working on building a train my computer went off and would not come back up. We I had dislodged one end of the batter. Plugged in back

Hi ON a Pi, or most other Linux systems you can add a udev rule. In?/etc/udev/rules.d? ?add a rule. Call it something like jmri.rules. It should/must finish with ".rules" IN that file put

Terry could you please elaborate on this? I am playing with SignalMasts over DCC decoder using NMRADCC library and can see the same very extra 0 at the end of extended accessory packet.

This issue has been address and resolved in Jenkins build 4.19.3, Tested it on? LB-USB > DCS50 Zephyr?? and Track power remains off. Tested it? on the Digitrax PR3 >DCS50 Zephyr ? and track power

Dave in Trempealeau this question is for you.? I searched but only found thousands of sites related to 4 legged cats. Dave...in Colorado