开云体育

Haha no worries! Let me kow what you find, im still siving through things. -- Thanks Mitch

Mitch, Don’t worry about BR-2003-WE. The internal name for BR-2003 turns out to be BR-2003-WE. Dave Sand

dave, That should be uploaded now. I'm struggling to find the BR2003-WE signal definition. The folder of definitions just shows BR2003 but when i go to add a signal, im only shown BR2003-WE. I have

Mitch, You can upload the session.log file. It is at the settings location/logs. See Help >> Locations. Dave Sand

Dave, The auto-generate does work, however S01 should not be able to get to S04, and S01 cant get to S08, but can get to S07, the error being jmri.JmriException: Path not valid, prtecting block is

Mitch, I see that you have a custom signal system: BR-2003-WE. You will also need to create a zip file and upload that to your problems folder. Dave Sand

Mitch, I loaded your panel, deleted all of the signal mast logic and did the automatic generate successfully. The screenshot is curious but does not show the environment. If you have the JMRI console

Hi Dave, I have uploaded my XML file, shorty followed by a screenshot of error messages. -- Thanks Mitch

Mitch, Screen shots are uploaded to the group’s Photo area. If you upload your panel xml file to the Files ProblemsBeingWorkedOn Folder, we can see if there is a data issue. Dave Sand

The plot thickens! The Discover Signal mast does not seem to work anymore, and if I have the message log open, it throws an error and crashes. Same error as above. I have a feeling that my file is

Jeff, I can send you privately some instructions for a non-JMRI test of your serial connection to the Power Pro. That takes a big set of variables out of the equation. But I'll need to fit it around

I don't bother with OpSw 36 but instead use OpSw 39 two or three times a year at my club. We do not disconnect or touch anything on the command station. Using LocoNet >> Configure Command Station 39

Jeff, It sounds like we are not getting to the USB device. But there are a few options left to try. 1. Create a new profile to get a fresh start. Just in case something is in the existing profile

Based entirely on experience with DCS100/200 Command Stations, but using PanelPro with JMRI version 4.17.3 and several previous versions, there is something important to add to [Billybob's excellent

Hi Marcus, Sorry, I have obviously assumed far too much knowledge of things I've been immersed in for 40 years (though I'm 60 myself and semi-retired, this is my trade more or less). It is a fact that

Hi Charles I am a model railroader with a Laptop connected to my layout to make for easier programming of decoders. What is an “MD5” an “AV” a “checksum” a “mirror being compromised”

Thanks for the replies, guys. I probably did a poor job of explaining the situation in my original post so let me try to clarify I have two flatcars. They do not travel in a kernel. Here a the

Surely you can override this warning with most AV products? I would have thought you can obtain an MD5 checksum of a known good copy of the installer, check your download against it, and if all is

Marcus, I get a similar message if I download and install the day an update comes out. I use Norton and on the pop up click the down carrot and chose install anyway. Does you software have a similar

Hi Mike Thanks for your quick reply, it allowed me to review “your” discussion that I had seen but I did not “comprehend”, as I have other issues going on. Reading the discussion, it seems