开云体育

Don: Your connection to CVP will only be able to run trains either with a display/keyboard/mouse or WiThrottle server... The later is the main point of Steve's RPi-JMRI... Wireless throttles... When

Try manually entering the server and port into the phone to see if that works. The advertising feature depends on which computer OS and sometimes what else was loaded on the computer. Many Windows

Thanks, Jim. Linux may prove to be a bit far in the weeds for me, too. I hope not! I've not used it, except for running some apps on a Linux computer. I'm hoping I'll not need to learn much about it

I am unable to get withrottle to work on my NCE window 7 system. The phone sees my network but jmri does not see the phone as a client. Thoughts anyone?

This is an issue with the Digitrax PR3 and not JMRI. Below is from the JMRI website http://jmri.org/help/en/html/hardware/loconet/PR3.shtml Using the PR3 programming track to program Non-Digitrax

Used Decoder Pro to change two Athearn GP38-2 locos from address "03" to their four digit road numbers.? However, on both locos the sound was removed but the locos operated with lights. Soundtraxx

On vacation, I'll take a look when I get back next week. Dan

Please read about aggressive mode.? The number of passes has no bearing on overloading. It is always possible to overload a track in aggressive mode, when the 1st train built does a pull and the 2nd

It is my understanding that the number of passes matters in how JMRI calculates whether or not there is space available at the spur. With a single pass, I believe it is correct that the spur is not

Hi Tony, "I do keep a motor on the track when programming so the decoder sees a load." That's not right. The decoder doesn't see a load if you have the motor on the track. The command station does

I agree with Matt that JMRI cannot assume a train has done it's work until it is terminated or Moved past a location.

I don't think increasing spot length would work. JMRI might try to put three cars into a 2-car-long spur.

Build is set for 3 passes, Aggressive. But I don't see why that would matter.

Don: Some time ago I mentioned CVP to Steve for his auto detect... I think he said it was in the newer releases of RPi-JMRI... I never tested it on my friends RR... he's kinda a Win or else and the

Thank you.

Ray and Mark My understanding is that the space is not available until the train is terminated or moved in the computer. This is one of those quirks that is good. I have used other programs that would

Thanks, Rick! It's great to know there is an inexpensive, tested adapter and that no drivers need be added. I'll order two in the next few days. Don

Dave The jmri program wont read or write to the decoder. I do keep a motor on the track when programming so the decoder sees a load. When programming using the handheld the 2 address entering a

Possible causes- How many “passes” do you have JMRI set up for 1, 2? If the train that picks up the car is “built” first, it doesn’t matter that it might take longer or get to the spur

Tony, Here's a reply I got from TCS support when I had similar sounding issues with a couple of M1 decoders I have. I have several I picked up at a S-S quite a number of years back that tend to go a