开云体育

Brian, a few things to check in the DigiTrain App make sure the setting for 1) Connection -type is set to JMRI 2) in the JMRI setting the JMRI_IP is the ip address of the computer/device running JMRI

I load "DigiTrains" from the Google Play Store for Androids. In JMRI under Preferences, WiThrottle, Network tab, I marked "Start automatically with application". In JMRI under Web Server, Web Server

I checked, the date is 11-4-2014, so back to TCS for a update. Thanks. Dennis C.

Update: I got up the nerve this morning to unplug my computer from everything, open it up and disconnect the USB plugs from the computer and remove them. After plugging in a USB cable and with some

Ok thank you Paul!

Steve, That method should work for you - it has for multiple layouts. One minor thing is that designer may ask you for the off command. Since you want the SE8C to handle the flashing, just ignore that

Which LIUSB do you have? Is it the one with or without the Ethernet connection? What LEDs are turned on? Paul

Here you go Bob�. https://www.facebook.com/groups/763694213706645/ 揢sers of JMRI� is a group on Facebook. Cheers, Rick Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

Hello Steve� I DO appreciate your taking the time to look at this. Here are my system stats: Windows 10 Pro 64 bit Intel Pentium i-7 processor 32gb RAM 1 TB hard drive NVIDIA graphics 1gb internet

The XpressNet simulator, and all of the simulators we support, allow development of panels when a real layout isn't available. Paul

What is the purpose behind using Xpress Simulator in the System Connection box?

I鈥檓 curious what that refers to. Haven鈥檛 heard of an another place where people get answers. Could you point me to that? Thanks. Bob -- Bob Jacobsen rgj1927@...

This is widely misunderstood. Most people think 鈥淚 have four possible output colors, so I have to send two turnout commands, each of which carries a bit via thrown/closed, to pick one of those two

Hi Rick I will look at this tomorrow for you (EST), and try and see what's happening. I need to know the version of JMRI you are using, your operating system, and your type of printer. If you can, can

Acknowledgement normally comes from the decoder pulsing the motor. You don't have a motor. The decoder should still program though, just no ACK or reading. Peter

Hi, For reasons unknown to me I cannot read and program a Digitrax SFX006 which I want to use in a dummy locomotive (custom sound, no other motordecoder). I am using JMRI 4.4 with a PR-3 plus PBT-100.

Right click used to work for adding NX sensors to turnouts but now I get a message 'Error - No turnout name was entered. Please enter a turnout name or Cancel.' which is most odd again as you do not

Rodney, Your method sounds like it will work, thanks. So even though two turnout commands are required by the SE8c to generate an aspect, we really only need to send one for each color - did I

Still not getting any help here or on the "other" JMRI site. How can I enlarge the font when printing out copies of my loco CV pages? Mine all print so small you need a magnifying glass to read it??

Any takers please? I'm having a others issues but thought I'd start with these. Ta.