开云体育

Thanks, Walt. ?I just read up on it and it looks like a stand alone instrument for adjusting the decoders, to be used on a test track without the MRC connected. ?Use it on the test track. Do what

Terry, I find your response very disappointing. Whenever you have an issue you only supply minimal information and when ask for more you don't provide anything or give a response like you just did. So

Terry: to find out what is causing the problem you are seeing i developers would need to know how you have things set up. If you do not want to give that information on how things are set up what is

Walt thanks for your help but I'm tired of messing with this So i'll just use DP with out the Slot monitor Ive upgraded a dozen times in the past and never made any changes to My settings and the slot

Hi Thomas If identifying the decoder model doesn't give you anything, it could be that your new BR85 has got an MX645P22 with the latest SW release 37 (version number is stored in CV7). This new

Reference: JMRI Ops ?I am a new user of JMRI Operations, using it foroperations only, with no plans to interface hardware on my HO railroad. I have beenworking on implementation for 10 weeks now and

Terry: We need to get answers to how things are set, "made no change" does not tell how they set.. Walt

There are no "plans to add" definitions for particular decoders. JMRI is a purely voluntary project and it is a case of an individual (who may or may not be a regular developer/contributor) finding

There are no "plans to add" definitions for particular decoders. JMRI is a purely voluntary project and it is a case of an individual (who may or may not be a regular developer/contributor) finding

Further to earlier email, are there any plans to add the DCC Concepts Accessory Decoders to the Roster? Again, if not, where should I store these entries? Rgds Joff

Are there any plans to add LDt LS Accessory decoders to the Roster? If not, can anyone suggest where they should be stored for now? Rgds Joff

Did you do New Loco->Read Type from decoder? BTW almost all modern ESU motor decoders identify to a unique JMRI model (if your JMRI version is current). The only exception is the "LokSound Select

Actually, you need to do New Loco->Read Type from decoder. Identify is only for existing roster entries and mainly looks at loco address (I can't remember offhand but it may also check

It's a Dell laptop running xp I've used it on all previous versions of DP going way back I made no preference changes when I up graded to 4.8 Just downloaded and installed 4.8 Everything works fine

Terry: What is the Computer system you are using, the OS may be important. Alos in the Preference under Display what do you have set? I changed my Preference connection to ZephyrXtra and do not see

The command station is a zephyr extra the headings across the top that say unused/show all slots are what I am calling tabs And yes it's loco net slot monitor in production ver 4.8 [Non-text portions

Bill The PR3 will not connect you tp the MRC command station! It is to connect to a digitrax command station of to be used as a stand alone programmer of decoders. Walt

The Roco documents with the Lok say PLUx22. (With sound and smoke.) JMRI gives a list of dozens of decoders. Sort of like Tsunami or Loksound. My first ZIMO, so I do not want to do something bad.

Hi It should not matter which Zimo small scale sound decoder it is, they should all behave the same re mapping. It all depends which socket you have in the loco as to which decoder is fitted:- PluX-22

Terry, Are you referring to LocoNet Slot Monitor? If so, what do you mean by "all tabs"? There aren't any "tabs", at least "tabs" as I know them. What command station? If DCS240, are you using