开云体育

Jim: I saw you signature after I had posted. If "Breezlys" fix did not fix it, can you control the locos with a Digitrax hand held throttle? Walt

Thanks Paul. The DR5000 has Wi-fi (router) and lan built in. I have tried to use LAN, Wi-fi and also a Lenz 23151 LAN/USB with XpressNet to the DR5000 I have got a set 100 also, which I’ve tested

Jim, It sounds like your command station is in "Stop" mode. I'm not sure how to correct that using JMRI, maybe turn the power on twice (can you even do that or does JMRI toggle between off and on)?

Hi Walt. I did sign my name...it was a few spaces down on the page and I apologize. Thanks for answering me. After fiddling for several hours I have noted the following: 1. Power on/off works well and

John., Thanks for the suggestion. Yes, the appropriate cars are there on the 7 missing tracks. Norman

Dan, Thanks. I have checked them carefully, and found nothing. But I have to believe that, as you suggest, something must be set wrong in those tracks. When I get time over the next few weeks, I will

John, Yes, the appropriate cars show up on the "missing" tracks. Thanks for the suggestion. Norman

Dan, I appreciate the quick response. But you missed the point. I cannot even select any or the seven tracks in order to build a train. I can select any of the other 43. Each train is built from one

Hello everyone, I am trying to figure out signaling, I have made a simple 5 block track segment with signals protecting each block boundary, I have created blocks for each section and put in virtual

Hello all, I recently had my PC restored by a low level format and then upgraded to Windows 8 (from Vista). I downloaded the JMRI version 4.6 and started using the WiThrottle right away with no issue.

I suspect it means that you are not connected to the command station from the computer. Can you turn track power On and Off using the JMRI 'Power Control" tool? Signing you name help us talk to you.

If you can't quickly figure it out, the train's build report will state why the seven tracks were ignored. Dan

Mike, On the LH100, I believe there is a setting that sets whether the stop button sends an off or an emergency stop. ( I may have that confused with another device though, not looking at a manual and

See below: Correct. When addressing a consist, NCE command stations: - Always sends speed commands to the consist address. - Always send function commands to the lead loco alias (or rear if you select

Just out of curiosity Look at you car roster sorted by location and see if your cars show up on the"missing" tracks John Birmingham

Norman, The program will only list tracks that the train can use. Look at the 7 tracks carefully, there's something you did to tell the program that those tracks can't be used. Let us know what you

Some of my staging tracks do not show up when I try to build a train. I have 50 staging tracks, all set up identically, all loaded with cars. I have the option to select which track to use to build a

Fraser, I recommend that you move your custom signal mast system to your user files location. This eliminates the need to update the JMRI install location each time you install a different release.

Steve, I've been having some problems myself, always thinking it must be me... but it seems my upgrading to the latest test version has not only revealed some great and useful improvements in the

Ted, You say you have the functions on both units set to respond to the consist address. Set the functions you want to stay off on the second unit to respond to locomotive address only. Wil, More