开云体育

Tim, The problem is that the NmraPacket class in JMRI creates and appends the checksum for every method (packet type) defined. <https://github.com/JMRI/JMRI/blob/master/java/src/jmri/NmraPacket.java>

Tim, Agreed, provided the DCC++code is updated as well That needs updating to scan the extra parameter and load it into the extra element of the array.

On another thought, though: Extended Decoder Control Packet address for operations mode programming (clause 485 on page 10 of s-9.2.1) looks like this: Of these 6 bytes, last checksum byte does not

Dave, This makes me think the DCCppMessage.java is worth updating for 6 byte packets, too :) (It is probably worth nothing to note that DCC++ code, as it seems, will not spot extra bytes in 'M'

Sorry, link omitted. <https://sites.google.com/site/mgurriesncedcc/home/nce-problems/powercab-smartbooster/powercab-expansion> Dave in Australia

Tom, Agreed. Yes, you have a Virtual Com Port, created by the SiLabs VCP driver.

Tom, You're looking the wrong place. That is all good. Wait for the email I'm currently composing. Dave in Australia

- Dave: A little bit more feedback from the system that may help you in figuring out what's going on.? Here are the error messages when I start the program with the USB cable removed: - Unable to

Dave: Thank you for your prompt reply to my situation.? Still cannot get the program to stay "online".? Let me respond sequentially to your suggestions: 1. I had already downloaded the SiLabs

EsK, The DS64 roster entry is only usable via a LocoNet connection. This is because the JMRI code for the LocoNet connection has the appropriate interpretation of the CV number "115:12", but none of

The LocoNet menu's DS64 Configuration tool is _only_ able to work across a LocoNet cable; it cannot perform any useful function with a DS64 without a connected and functional LocoNet. As such, it will

Marc, Went to the club to capture the log after getting the error and of course I could not get the error to show. I have shown others what I need should the error return so I can post it here. A

Terry, Just to be clear, you position the mouse over a turnout name, click and hold the mouse button, move the move over a "undefined" box and release the mouse button? What version of JMRI are you

Tom, - The NCE USB uses the SiLabs CP2102 chipset. Download and install SiLabs CP210x drivers from <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers> - There

Sorry I missed this question. I am in Panel Editor attempting to add a double crossover using the scissors with (4) turnouts. I put a screen shot? in Photo's under Panel Pro Editor Double X over. I

I am including the link, sorry I forgot to have it ready for the earlier post. /g/jmriusers/photo/240971/0?p=Name,,Panel+Pro+Editor+X+over,20,1,0,0 -- Terry Cummins S.E. Michigan

Dave, I uploaded a screen shot of the Panel Pro Editor screen open with the "undefined boxes". Sorry I don't know why the screen shot is so fuzzy. Additionally I tried as you suggested moving the

Hello Guys, I am new to this and new to this group as well. Was not sure if I am supposed to create a new thread or what, so am taking the liberty of posting it here. 4’ x 8’ N scale, Kato

Nope, sounded great, but no amount of combinations have yielded success at this point. I know it have probably worked for everybody else but it is not working for me. I am posting a screen shot so

Ah Ha! Now that I have not tried! Thank you. I will report back ASAP. Terry Sent from Mail for Windows 10 Sent: Monday, February 10, 2020 7:57 PM To: [email protected] Subject: Re: [jmriusers]