Locked
Re: Double crossover problem in Panel Editor
Something still not right. I tried both your approaches in Logix with internal and real turnouts but still not working right. Panel icons change but not to correct image. It acts more like a right
By
Paul Davidson
·
#154239
·
|
Locked
Stopping due to error: No locomotive detected (301)
I¡¯m a novice to DecoderPro and the following might help others 1.??????I¡¯ve just bought an old SprogII and installed the latest software on a laptop running Windows 7. 2.??????Borrowed
By
David Griffiths <dm.griffiths@...>
·
#154238
·
|
Locked
Re: Double crossover problem in Panel Editor
Paul D, In the Logix, build it this way: Condition: Turnout XXX-1 on Thrown Action: On True, Turnout XXX-2, set Thrown On True, Turnout XXX-3, set Thrown On True, Turnout XXX-4, set Thrown On False,
By
Ken Cameron
·
#154237
·
|
Locked
Re: DR5000 XpressNet
I managed to get JRMI on a Macintosh working with the DR5000 with your help and another?post. ? After making sure I had the correct drivers from?https://www.ftdichip.com/Drivers/VCP.htm?I connect
By
John Kabesh
·
#154236
·
|
Locked
Re: Using Digikeijs DR5000 with a Macintosh Computer
I managed to get JRMI on a Macintosh working with the DR5000 with your help and another?post. ? After making sure I had the correct drivers from?https://www.ftdichip.com/Drivers/VCP.htm?I connect
By
John Kabesh
·
#154235
·
|
Locked
Re: Double crossover problem in Panel Editor
Paul, 3 internal plus 1 real will never work since they will be fighting with each other. What you need are 2 internal plus 1 real with the following Logix: IX:AUTO:0003C1 DX Test [x] R1 IF Turnout
By
Dave Sand
·
#154234
·
|
Locked
Re: Double crossover problem in Panel Editor
Dave, Correct....all 4 Kato turnouts operate in unison...all closed or all thrown although you can mess that up because you can manually close/throw each switch independently. Also, I built an
By
Paul Davidson
·
#154233
·
|
Locked
Re: Signaling Question Using SSL
Howdy Clay. I was curious about replies, but found there were none.? For your question of "Using SSL, is it possible to create a panel that can detect the direction of travel?", I don't think you
By
Phil in gorgeous Young Harris
·
#154232
·
|
Locked
Re: Double crossover problem in Panel Editor
Paul, The PE double cross-over requires either 2 or 4 turnouts. I have no idea why it does not support since 1 is certainly a valid arrangement. The Layout Editor double cross-over requires 1, allows
By
Dave Sand
·
#154231
·
|
Locked
Re: MQTT Connection in JMRI
Hi Everyone, I am very interested in this conversation. As a DIYer and C/C++ and Java hobbyist programmer, QA Test Specialist and Project Manager in my day job, I like where this is going. And yes
By
Victor Gilbert
·
#154230
·
|
Locked
Re: Double crossover problem in Panel Editor
Dave, No..... but I did not do that the last time I was successful.? I tried it now and the first drag went OK but it would not let me drag the same turnout number to a second box. It said the
By
Paul Davidson
·
#154229
·
|
Locked
Re: Double crossover problem in Panel Editor
Paul, After you add the four turnouts using the "Add item to table", are you dragging the related entries to the ¡°undefined" boxes above the icons? Dave Sand
By
Dave Sand
·
#154228
·
|
Locked
Re: MQTT Connection in JMRI
Does this mean that even the simplest HW device being directly addressed in an MQTT net needs a full TCP/IP Stack? Not sure how that makes things simple. Andy --- This email has been checked for
By
Andy Reichert
·
#154227
·
|
Locked
Double crossover problem in Panel Editor
Earlier I asked a question on forum about how to insert a double crossover in PE. After stumbling around, I finally got it to work. However, I no longer can get it to work (Ver 4.13.5). I must be
By
Paul Davidson
·
#154226
·
|
Locked
Re: MQTT Connection in JMRI
A few more things to think about... - will JMRI subscribe to every topic that contains a sensor/turnout/mast? I have found there are limits (in performance and memory) for subscribing to too many
By
Speed
·
#154225
·
|
Locked
Re: MQTT Connection in JMRI
What do you mean by look for?
By
Nathan Tableman
·
#154224
·
|
Locked
Re: MQTT Connection in JMRI
it would be great if the community could converge on how JMRI should work with MQTT devices. Some boundary conditions: 1) JMRI has specific control metaphors: Turnout (i.e. one-bit digital output),
By
Bob Jacobsen
·
#154223
·
|
Locked
Re: Blocks next to Crossovers are inaccessible as transit destinations
Lain.? Yes there are End Bumpers at every stop and each has a Signal Mast. Those Signal Masts are included in the SML and used for defining Sections. Dave.? For your first question, I changed from
By
Jack Basiago
·
#154222
·
|
Locked
Re: Using Digikeijs DR5000 with a Macintosh Computer
Thanks Bob I tried the Ethernet connection but I have the same problem as with wifi. ?I can not use the z21app as the setting on the DR5000 are different. ?I will have have to figure out how to use
By
John Kabesh
·
#154221
·
|
Locked
Re: MQTT Connection in JMRI
I agree with what everyone is saying. I do home automation also including node red. The key is to offer people flexibility, so they aren¡¯t forced to use other software if they choose not to. I guess
By
Chris Rood
·
#154220
·
|