开云体育

Screen capturing a window gives you the 'graphic' image which is going to
have the actual fonts and colors displayed on the screen. In many cases
the text is not a deep black but a lighter grey or some other color. The
printer is reproducing the 'lightness' of the actual font.

A couple of things you can try. First, bring up the printer properties in
the print dialog and make sure it is printing in black and white. Not
color or gray-scale. Secondly you might be able to modify the text color
and font style in the program itself to give you a true black text in the
display. Third, maybe you can highlight, cut and paste the listing from
the program window into Notepad so you can get actual text which you can
resize and bolden before you print. It is very possible that the position
formatting will get all screwed up though.

Be interested to hear what if anything works for you.

Mike Piazza

On Aug 4, 2017 11:14 PM, "James Allen jcallen1@... [jmriusers]" <
jmriusers@...> wrote:

I have lost much of my sight and find it a bit difficult to read the
switch list and manifest reports printed out by JMRI. i recently purchased
a new printer to address the problem but still the print is somewhat light
even after changing all the print setting on the printer. If I capture a
screen shot of a portion of a switch list using the screen capture program
"JING" the captured switch list printing is black and easy to read. Is
there a modification to Panel Pro for printing darker print? Can one print
through another program such as Excel to try addressing this issue.

James Allen
jcallen1@...

[Non-text portions of this message have been removed]

You should only buy surge protectors both whole house or power strip that display their status. My whole house protection panel show 2 greens if all is okay (2 phases). If the system trips then the green lights are out..

You do have to check the panels if you want the status and if you don't replace the module before another hit happens, you have no protection.


Mike
Atlanta, GA

I have lost much of my sight and find it a bit difficult to read the switch list and manifest reports printed out by JMRI. i recently purchased a new printer to address the problem but still the print is somewhat light even after changing all the print setting on the printer. If I capture a screen shot of a portion of a switch list using the screen capture program "JING" the captured switch list printing is black and easy to read. Is there a modification to Panel Pro for printing darker print? Can one print through another program such as Excel to try addressing this issue.


James Allen
jcallen1@...

Hi
To add a Sensor to a layout panel, add icon and select "Sensor icon".Stopping sensors fwd and back are relative to the fwd back of the block / section direction not the direction of the loco.They are used to position the train if it's been requested to stop, not to stop a train at a proceed signal, for that use an action, or manually change signal to red.Depending on your version of JMRI the clicking on the sensor only works with no zoom.?
Steve G.
Hi,


Just to add...


I have worked out that I can hand edit the layout xml file to add an ON SENSOR ACTIVE/INACTIVE action. When I do I can stop the engine at the appropriate point at a station. The TransitSectionAction?
documentation in the Javadoc documentation tells you how to do this.


There does not seem to be anyway to add it using Layout Editor nor the SET SENSOR ACTIVATE/INACTIVE events. Am I missing something.

[Non-text portions of this message have been removed]

I just started getting this on my computer. Last week all was working well.
Today I can't connect. phone sees the modem and that it is connected. But
the program doesn't see my phone.

Hi,


Just to add...


I have worked out that I can hand edit the layout xml file to add an ON SENSOR ACTIVE/INACTIVE action. When I do I can stop the engine at the appropriate point at a station. The TransitSectionAction
documentation in the Javadoc documentation tells you how to do this.


There does not seem to be anyway to add it using Layout Editor nor the SET SENSOR ACTIVATE/INACTIVE events. Am I missing something.


I still cannot get Section forward/reverse stopping sensors to work...


Simon K

Whats' the experience of anyone using the traditional protection of a separately well grounded lightning conductor higher than the nearby building(s).

Andy

On Aug 3, 2017, at 7:25 PM, Denny Anspach danspachmd@... [jmriusers] <jmriusers@...> wrote:

A 240v power surge in January fried almost everything in the house not on surge protectors. The latter did their jobs well, but gave up their lives in the process.

Denny
Sacramento

Nice to hear from you Denny!

Your experience raises another point: Surge protectors don’t last forever. After enough hits (or a big enough single hit), they’re not “protecting” any more. This can lead to a false sense of confidence….

Bob
--
Bob Jacobsen
rgj1927@...

Larry,

I thought I would add a couple of tips to help you along. First and you may already have figured this out, the numeric part of the System Name, ie. the 257 of LT257 and 258 of LT258, are the switch numbers that the SE8c will respond to for controlling the signal. (You can enter switch mode on a capable throttle such as a DT400 and control the signal directly - useful for testing your hardware setup).

Second, you should always assign a User Name to each signal. This is so that later when the need arises you can easily change the name and JMRI will handle the associations but you cannot change the System Name.

I hope this is helpful and not confusing.

Dale Gloer

Suggest you look at these two links. They will explain what needs moving, even if you aren't interested in using Dropbox:
<>
<>
--
Dave in Australia

I would highly recommend a whole surge protector be installed in their house. I believe that it saved my major electrical components for the lightening strike at my house. Both neighbors on either side were replacing tVs and other items and they had no whole house surge protectors. For about $500 installed it is worth it.

It won't help you network cables as I found out but it could have been a lot worse for me.

i need to migrate my Decoder Pro files from my ancient PC to a MacBook Pro. I've installed JMRI 4.8 on the Mac, now what Decoder Pro files need to be copied over that contain my roster of locos with decoder settings? The PC has a bazillion JMRI files from 15+ years of using JMRI. I only want to transfer the essential DecoderPro files. Is there a "Help" file somewhere that describes the files and how to make the transfer?
Should I "copy" the files over or use the "export" function?


Thanks in advance - Joe

A 240v power surge in January fried almost everything in the house not on surge protectors. The latter did their jobs well, but gave up their lives in the process.

Denny
Sacramento

Denny S. Anspach MD
Sacramento

Thanks for the help. The solution definitely had to do with profiles. When I got to “set active profile” and selected another I had created much earlier when starting with the program. The old profile worked consistently, with many tries to confirm successful launch. I did not have to create a new one with a simulator as connection type. Thanks for the help! This was so easy and enjoyable, after about 20 hours of researching and documenting other failed approaches. Still don’t understand exactly what happened with the profiles, but who cares. Now it works.

Sent from Mail for Windows 10

From: breezlys@... [jmriusers]
Sent: Thursday, August 3, 2017 4:24 PM
To: jmriusers@...
Subject: [jmriusers] Re: JMRI Ops Launch Issues

?
Bill,

JMRI is probably hanging up because it's trying to connect but can't.

I'd suggest setting up a profile (or modifying an existing profile, if you have one) with one of the simulators selected as your connection type.

That will prevent it from looking for a physical connection that doesn't exist.

HTH,
Steve
"Breezlys"

---In jmriusers@..., <billandeden@...> wrote :

Reference: JMRI Ops

I am a new user of JMRI Operations, trying to use itin simple form for operations only, with no interface to my HO railroad. I havebeen working on implementation for two months now and been able to understandthe basic operations, and have enjoyed setting things up, learning from themanual and various YouTube and related Web items.

Here’s the background information:

Using Dell Inspiron laptop

Windows 10 Creators

Java Version 1.8.0.141

JMRI Version 4.8, updated from 4.6

No interface to HO railroad or devices in use

The problem involves launch of JMRI. It starts tolaunch but pauses after a few seconds. Subsequent attempts result in themessage “already running do you want to continue.” Neither “yes” nor “no”produce any good results. I get no other messages or warnings, and neitherSession nor Messages are created since there was no launch to report (unlessyou do Install Test—and that always produces good reports, without warningsthat I can interpret, since it does launch).

<snip>

Open up decoderpro, select engine in question and right click. On the menu
about half way down will be something like "media and functions". Select
that and you'll get a window where you can label functions.

It's not pretty done 'cause often different per engine

On Aug 3, 2017 12:01 PM, "coxt@... [jmriusers]" <
jmriusers@...> wrote:

When I open a new throttle, I see grayed out buttons F1 - F15. When I
select a locomotive and click <Set>, however, all those buttons turn into
SS1 - SS16. Also, when I look at the function map, I don't see a verbal
description like "Drive sound," or "Whistle/long." Also, the only sounds I
can activate are SS1, SS2, SS3, SS4, and SS5. There are many more sounds
but I can't activate them. I have clicked "read all sheets" several times.
This all once worked correctly, but not any more. Any ideas?

JMRI version: 4.8
Decoder type: ESU Loksound XL
Central station: Intellibox 65000


Thanks,
Tom

Bill,

JMRI is probably hanging up because it's trying to connect but can't.

I'd suggest setting up a profile (or modifying an existing profile, if you have one) with one of the simulators selected as your connection type.

That will prevent it from looking for a physical connection that doesn't exist.

HTH,
Steve
"Breezlys"


---In jmriusers@..., <billandeden@...> wrote :

Reference: JMRI Ops

I am a new user of JMRI Operations, trying to use itin simple form for operations only, with no interface to my HO railroad. I havebeen working on implementation for two months now and been able to understandthe basic operations, and have enjoyed setting things up, learning from themanual and various YouTube and related Web items.

Here’s the background information:

Using Dell Inspiron laptop

Windows 10 Creators

Java Version 1.8.0.141

JMRI Version 4.8, updated from 4.6

No interface to HO railroad or devices in use

The problem involves launch of JMRI. It starts tolaunch but pauses after a few seconds. Subsequent attempts result in themessage “already running do you want to continue.” Neither “yes” nor “no”produce any good results. I get no other messages or warnings, and neitherSession nor Messages are created since there was no launch to report (unlessyou do Install Test—and that always produces good reports, without warningsthat I can interpret, since it does launch).

<snip>

Billybob,


Yes, that makes a lot of sense! I was checking out all the signal head types in JMRI and "Quad" seemed to be a type that would work, but it had four spots in which to enter turnout addresses but no place to indicate the state, e.g. "Thrown" or "Closed" for that switch command.


The LDT seemed to have what I needed. I'll experiment with it.


In the meantime I have this working in CATS following Rodney's advice, that being, to simply indicate the turnout command for each aspect of each head of each signal within the CATS designer file. Tedious yes but it worked.


I'd prefer eventually to go to signal heads in JMRI because there are parts of the layout that I automate and I'll want to be able to "describe" the entire layout in Layout Editor (Panel Pro) so the automated dispatcher can run trains into and out of staging as well as running them for open house etc. (I'm now using another software product for the automated running but am working on migrating to 100% JMRI).


Thank you for all the help!


Sincerely,


Steve

Thank you Peter, once I got over the system name not being what I expected it to be, I was able to get to work.

Larry

When I open a new throttle, I see grayed out buttons F1 - F15. When I select a locomotive and click <Set>, however, all those buttons turn into SS1 - SS16. Also, when I look at the function map, I don't see a verbal description like "Drive sound," or "Whistle/long." Also, the only sounds I can activate are SS1, SS2, SS3, SS4, and SS5. There are many more sounds but I can't activate them. I have clicked "read all sheets" several times. This all once worked correctly, but not any more. Any ideas?

JMRI version: 4.8
Decoder type: ESU Loksound XL
Central station: Intellibox 65000


Thanks,
Tom

Reference: JMRI Ops

?I am a new user of JMRI Operations, trying to use itin simple form for operations only, with no interface to my HO railroad. I havebeen working on implementation for two months now and been able to understandthe basic operations, and have enjoyed setting things up, learning from themanual and various YouTube and related Web items.

?Here’s the background information:

Using Dell Inspiron laptop

Windows 10 Creators

Java Version 1.8.0.141

JMRI Version 4.8, updated from 4.6

No interface to HO railroad or devices in use

?The problem involves launch of JMRI. It starts tolaunch but pauses after a few seconds. Subsequent attempts result in themessage “already running do you want to continue.” Neither “yes” nor “no”produce any good results. I get no other messages or warnings, and neitherSession nor Messages are created since there was no launch to report (unlessyou do Install Test—and that always produces good reports, without warningsthat I can interpret, since it does launch).

?I have continued to work on my locations, routes, cars,etc., but only in the Install Test Mode. The changes I make are being stored inthe correct places for My JMRI Railroad, from what I can understand.? I sure hope I can still use the work I havealready done in the Install Test Mode, if I can ever solve the JMRI launchproblems. In the meantime I continue to launch through Install Test. Everythingseems to work just fine there.

?The “Release Notes for JMRI 4.8 release” seem to holdpromise for my problem. However I cannot figure out how to try the fix. It saysthat 4.8 will not start cleanly if installed over earlier versions. It alsosays in that the Windows installer ensures this is not an issue—don’tunderstand what that means. I used Windows to install but still seem to havethe problem.

?Opening JMRI with Install Test does create a fulllaunch report, and within it there are multiple mentions of the culprit jackson-annotations-2.0.6,Jackson-databind-2.0.6, and Jackson-core-2.0.6. Some appear in Class Path andFinal Class Path, and all three appear in the final ExeString and Launch. Iincluded the full report at the end of this e-mail.

?The fix is to remove the three suspect files from thelib directory within the previous installation directory. I am completelybaffled by this instruction. Does that mean I should over-rite 4.8 with theprevious 4.6 or with 4.7.3 and somehow find the lib directory (whatever orwhere-ever that is) and remove those three files? Where can I find instructions?Do I need some kind of editing program to do that? Do I have to become a Javaprogrammer first?

?Any recommendations or other approaches would beappreciated.

?Thanks,

Bill Schmitt

?LaunchJMRI (in Install Test Mode) August 3, 2017

?CommandLine: LaunchJMRI? /debug /noisyapps.InstallTest.InstallTest????????

Default options:

AppName: InstallTest

Class: apps.InstallTest.InstallTest

Parameters:

Noisy: 1

Force32bit: 0

Profile:

Testing for x64...

Result: 1

Setting x64 registry view...

Setting x86 registry view...

JavaPath: C:&#92;Program Files(x86)&#92;Java&#92;jre1.8.0_141&#92;bin&#92;java.exe

Create folder:C:&#92;Users&#92;Owner&#92;AppData&#92;Local&#92;Temp&#92;LaunchJMRI

CopyFiles: C:&#92;Program Files(x86)&#92;Java&#92;jre1.8.0_141&#92;bin&#92;java.exe C:&#92;Users&#92;Owner&#92;AppData&#92;Local&#92;Temp&#92;LaunchJMRI&#92;InstallTest.exe

Result: 0

JExePath:C:&#92;Users&#92;Owner&#92;AppData&#92;Local&#92;Temp&#92;LaunchJMRI&#92;InstallTest.exe

PhysicalMemory: 3892m

Check if more than 4GB memory

Less than 4GB

Check if more than 1GB memory

More than 1GB

InitHeap: 96m

MinMemory: 192m

MaxMemory: 1946m

Checking maximum heap size...

Running x86 JVM

Adjusted MaxMemory: 1024m

...finished

Checking user.home...

Reading Desktop Shell Folder registry key...

...read: C:&#92;Users&#92;Owner&#92;Desktop

Checking if equal to %USERPROFILE%...

Comparing: C:&#92;Users&#92;Owner

to: C:&#92;Users&#92;Owner

user.home OK

Options:??-noverify -Dsun.java2d.d3d=false -Djava.security.policy=security.policy-Djinput.plugins=net.bobis.jinput.hidraw.HidRawEnvironmentPlugin-Dswing.defaultlaf=com.sun.java.swing.plaf.windows.WindowsLookAndFeel-Djava.library.path=.;lib&#92;x86;lib -Djava.rmi.server.codebase=file:java/classes/-Dsun.java2d.noddraw -Xms96m -Xmx1024m -Dfile.encoding=UTF-8-Dpython.home="C:&#92;Users&#92;Owner&#92;JMRI&#92;systemfiles"-Djmri.log.path="C:&#92;Users&#92;Owner&#92;JMRI&#92;systemfiles&#92;&#92;"

ClassPath:.;classes;jmri.jar;lib&#92;beansbinding-1.2.1.jar;lib&#92;bluecove-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-bluez-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-gpl-2.1.1-SNAPSHOT.jar;lib&#92;ch.ntb.usb.jar;lib&#92;commons-io-1.3.1.jar;lib&#92;commons-lang3-3.2.1.jar;lib&#92;gluegen-rt.jar;lib&#92;jackson-annotations-2.0.6.jar;lib&#92;jackson-annotations-2.8.5.jar;lib&#92;jackson-core-2.0.6.jar;lib&#92;jackson-core-2.8.5.jar;lib&#92;jackson-databind-2.0.6.jar;lib&#92;jackson-databind-2.8.5.jar;lib&#92;jakarta-regexp-1.5.jar;lib&#92;javacsv.jar;lib&#92;javax.servlet-api-3.1.0.jar;lib&#92;jdom-2.0.5.jar;lib&#92;jdom.jar;lib&#92;jetty-http-9.3.9.v20160517.jar;lib&#92;jetty-io-9.3.9.v20160517.jar;lib&#92;jetty-security-9.3.9.v20160517.jar;lib&#92;jetty-server-9.3.9.v20160517.jar;lib&#92;jetty-servlet-9.3.9.v20160517.jar;lib&#92;jetty-util-9.3.9.v20160517.jar;lib&#92;jhall.jar;lib&#92;jhidrawplugin.jar;lib&#92;jinput.jar;lib&#92;jlfgr-1_0.jar;lib&#92;jmdns.jar;lib&#92;jna-4.4.0.jar;lib&#92;jna-platform-4.4.0.jar;lib&#92;joal.jar;lib&#92;jul-to-slf4j-1.7.13.jar;lib&#92;jython-standalone-2.7.0.jar;lib&#92;log4j-1.2.17.jar;lib&#92;mailapi.jar;lib&#92;openlcb.jar;lib&#92;pi4j-core.jar;lib&#92;pi4j-device.jar;lib&#92;pi4j-gpio-extension.jar;lib&#92;pi4j-service.jar;lib&#92;purejavacomm-1.0.1.jar;lib&#92;slf4j-api-1.7.13.jar;lib&#92;slf4j-log4j12-1.7.13.jar;lib&#92;smtp.jar;lib&#92;vecmath-1.5.2.jar;lib&#92;websocket-api-9.3.9.v20160517.jar;lib&#92;websocket-client-9.3.9.v20160517.jar;lib&#92;websocket-common-9.3.9.v20160517.jar;lib&#92;websocket-server-9.3.9.v20160517.jar;lib&#92;websocket-servlet-9.3.9.v20160517.jar;lib&#92;WinRegistry-4.4.jar;lib&#92;xAPlib.jar;lib&#92;xbee-java-library-1.2.0.jar;lib&#92;xbjlib-1.1.1.jar;lib&#92;xercesImpl.jar

Check for any prepended/appended classpath entries

Final ClassPath:.;classes;jmri.jar;lib&#92;beansbinding-1.2.1.jar;lib&#92;bluecove-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-bluez-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-gpl-2.1.1-SNAPSHOT.jar;lib&#92;ch.ntb.usb.jar;lib&#92;commons-io-1.3.1.jar;lib&#92;commons-lang3-3.2.1.jar;lib&#92;gluegen-rt.jar;lib&#92;jackson-annotations-2.0.6.jar;lib&#92;jackson-annotations-2.8.5.jar;lib&#92;jackson-core-2.0.6.jar;lib&#92;jackson-core-2.8.5.jar;lib&#92;jackson-databind-2.0.6.jar;lib&#92;jackson-databind-2.8.5.jar;lib&#92;jakarta-regexp-1.5.jar;lib&#92;javacsv.jar;lib&#92;javax.servlet-api-3.1.0.jar;lib&#92;jdom-2.0.5.jar;lib&#92;jdom.jar;lib&#92;jetty-http-9.3.9.v20160517.jar;lib&#92;jetty-io-9.3.9.v20160517.jar;lib&#92;jetty-security-9.3.9.v20160517.jar;lib&#92;jetty-server-9.3.9.v20160517.jar;lib&#92;jetty-servlet-9.3.9.v20160517.jar;lib&#92;jetty-util-9.3.9.v20160517.jar;lib&#92;jhall.jar;lib&#92;jhidrawplugin.jar;lib&#92;jinput.jar;lib&#92;jlfgr-1_0.jar;lib&#92;jmdns.jar;lib&#92;jna-4.4.0.jar;lib&#92;jna-platform-4.4.0.jar;lib&#92;joal.jar;lib&#92;jul-to-slf4j-1.7.13.jar;lib&#92;jython-standalone-2.7.0.jar;lib&#92;log4j-1.2.17.jar;lib&#92;mailapi.jar;lib&#92;openlcb.jar;lib&#92;pi4j-core.jar;lib&#92;pi4j-device.jar;lib&#92;pi4j-gpio-extension.jar;lib&#92;pi4j-service.jar;lib&#92;purejavacomm-1.0.1.jar;lib&#92;slf4j-api-1.7.13.jar;lib&#92;slf4j-log4j12-1.7.13.jar;lib&#92;smtp.jar;lib&#92;vecmath-1.5.2.jar;lib&#92;websocket-api-9.3.9.v20160517.jar;lib&#92;websocket-client-9.3.9.v20160517.jar;lib&#92;websocket-common-9.3.9.v20160517.jar;lib&#92;websocket-server-9.3.9.v20160517.jar;lib&#92;websocket-servlet-9.3.9.v20160517.jar;lib&#92;WinRegistry-4.4.jar;lib&#92;xAPlib.jar;lib&#92;xbee-java-library-1.2.0.jar;lib&#92;xbjlib-1.1.1.jar;lib&#92;xercesImpl.jar

MaxLen: 8192

ExeString:"C:&#92;Users&#92;Owner&#92;AppData&#92;Local&#92;Temp&#92;LaunchJMRI&#92;InstallTest.exe"?? -noverify -Dsun.java2d.d3d=false-Djava.security.policy=security.policy -Djinput.plugins=net.bobis.jinput.hidraw.HidRawEnvironmentPlugin-Dswing.defaultlaf=com.sun.java.swing.plaf.windows.WindowsLookAndFeel-Djava.library.path=.;lib&#92;x86;lib -Djava.rmi.server.codebase=file:java/classes/-Dsun.java2d.noddraw -Xms96m -Xmx1024m -Dfile.encoding=UTF-8-Dpython.home="C:&#92;Users&#92;Owner&#92;JMRI&#92;systemfiles"-Djmri.log.path="C:&#92;Users&#92;Owner&#92;JMRI&#92;systemfiles&#92;&#92;"-Djava.class.path=".;classes;jmri.jar;lib&#92;beansbinding-1.2.1.jar;lib&#92;bluecove-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-bluez-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-gpl-2.1.1-SNAPSHOT.jar;lib&#92;ch.ntb.usb.jar;lib&#92;commons-io-1.3.1.jar;lib&#92;commons-lang3-3.2.1.jar;lib&#92;gluegen-rt.jar;lib&#92;jackson-annotations-2.0.6.jar;lib&#92;jackson-annotations-2.8.5.jar;lib&#92;jackson-core-2.0.6.jar;lib&#92;jackson-core-2.8.5.jar;lib&#92;jackson-databind-2.0.6.jar;lib&#92;jackson-databind-2.8.5.jar;lib&#92;jakarta-regexp-1.5.jar;lib&#92;javacsv.jar;lib&#92;javax.servlet-api-3.1.0.jar;lib&#92;jdom-2.0.5.jar;lib&#92;jdom.jar;lib&#92;jetty-http-9.3.9.v20160517.jar;lib&#92;jetty-io-9.3.9.v20160517.jar;lib&#92;jetty-security-9.3.9.v20160517.jar;lib&#92;jetty-server-9.3.9.v20160517.jar;lib&#92;jetty-servlet-9.3.9.v20160517.jar;lib&#92;jetty-util-9.3.9.v20160517.jar;lib&#92;jhall.jar;lib&#92;jhidrawplugin.jar;lib&#92;jinput.jar;lib&#92;jlfgr-1_0.jar;lib&#92;jmdns.jar;lib&#92;jna-4.4.0.jar;lib&#92;jna-platform-4.4.0.jar;lib&#92;joal.jar;lib&#92;jul-to-slf4j-1.7.13.jar;lib&#92;jython-standalone-2.7.0.jar;lib&#92;log4j-1.2.17.jar;lib&#92;mailapi.jar;lib&#92;openlcb.jar;lib&#92;pi4j-core.jar;lib&#92;pi4j-device.jar;lib&#92;pi4j-gpio-extension.jar;lib&#92;pi4j-service.jar;lib&#92;purejavacomm-1.0.1.jar;lib&#92;slf4j-api-1.7.13.jar;lib&#92;slf4j-log4j12-1.7.13.jar;lib&#92;smtp.jar;lib&#92;vecmath-1.5.2.jar;lib&#92;websocket-api-9.3.9.v20160517.jar;lib&#92;websocket-client-9.3.9.v20160517.jar;lib&#92;websocket-common-9.3.9.v20160517.jar;lib&#92;websocket-server-9.3.9.v20160517.jar;lib&#92;websocket-servlet-9.3.9.v20160517.jar;lib&#92;WinRegistry-4.4.jar;lib&#92;xAPlib.jar;lib&#92;xbee-java-library-1.2.0.jar;lib&#92;xbjlib-1.1.1.jar;lib&#92;xercesImpl.jar"apps.InstallTest.InstallTest

Output folder: C:&#92;Program Files (x86)&#92;JMRI

Launching JMRI

Execute:"C:&#92;Users&#92;Owner&#92;AppData&#92;Local&#92;Temp&#92;LaunchJMRI&#92;InstallTest.exe"?? -noverify -Dsun.java2d.d3d=false-Djava.security.policy=security.policy-Djinput.plugins=net.bobis.jinput.hidraw.HidRawEnvironmentPlugin-Dswing.defaultlaf=com.sun.java.swing.plaf.windows.WindowsLookAndFeel-Djava.library.path=.;lib&#92;x86;lib -Djava.rmi.server.codebase=file:java/classes/-Dsun.java2d.noddraw -Xms96m -Xmx1024m -Dfile.encoding=UTF-8-Dpython.home="C:&#92;Users&#92;Owner&#92;JMRI&#92;systemfiles"-Djmri.log.path="C:&#92;Users&#92;Owner&#92;JMRI&#92;systemfiles&#92;&#92;"-Djava.class.path=".;classes;jmri.jar;lib&#92;beansbinding-1.2.1.jar;lib&#92;bluecove-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-bluez-2.1.1-SNAPSHOT.jar;lib&#92;bluecove-gpl-2.1.1-SNAPSHOT.jar;lib&#92;ch.ntb.usb.jar;lib&#92;commons-io-1.3.1.jar;lib&#92;commons-lang3-3.2.1.jar;lib&#92;gluegen-rt.jar;lib&#92;jackson-annotations-2.0.6.jar;lib&#92;jackson-annotations-2.8.5.jar;lib&#92;jackson-core-2.0.6.jar;lib&#92;jackson-core-2.8.5.jar;lib&#92;jackson-databind-2.0.6.jar;lib&#92;jackson-databind-2.8.5.jar;lib&#92;jakarta-regexp-1.5.jar;lib&#92;javacsv.jar;lib&#92;javax.servlet-api-3.1.0.jar;lib&#92;jdom-2.0.5.jar;lib&#92;jdom.jar;lib&#92;jetty-http-9.3.9.v20160517.jar;lib&#92;jetty-io-9.3.9.v20160517.jar;lib&#92;jetty-security-9.3.9.v20160517.jar;lib&#92;jetty-server-9.3.9.v20160517.jar;lib&#92;jetty-servlet-9.3.9.v20160517.jar;lib&#92;jetty-util-9.3.9.v20160517.jar;lib&#92;jhall.jar;lib&#92;jhidrawplugin.jar;lib&#92;jinput.jar;lib&#92;jlfgr-1_0.jar;lib&#92;jmdns.jar;lib&#92;jna-4.4.0.jar;lib&#92;jna-platform-4.4.0.jar;lib&#92;joal.jar;lib&#92;jul-to-slf4j-1.7.13.jar;lib&#92;jython-standalone-2.7.0.jar;lib&#92;log4j-1.2.17.jar;lib&#92;mailapi.jar;lib&#92;openlcb.jar;lib&#92;pi4j-core.jar;lib&#92;pi4j-device.jar;lib&#92;pi4j-gpio-extension.jar;lib&#92;pi4j-service.jar;lib&#92;purejavacomm-1.0.1.jar;lib&#92;slf4j-api-1.7.13.jar;lib&#92;slf4j-log4j12-1.7.13.jar;lib&#92;smtp.jar;lib&#92;vecmath-1.5.2.jar;lib&#92;websocket-api-9.3.9.v20160517.jar;lib&#92;websocket-client-9.3.9.v20160517.jar;lib&#92;websocket-common-9.3.9.v20160517.jar;lib&#92;websocket-server-9.3.9.v20160517.jar;lib&#92;websocket-servlet-9.3.9.v20160517.jar;lib&#92;WinRegistry-4.4.jar;lib&#92;xAPlib.jar;lib&#92;xbee-java-library-1.2.0.jar;lib&#92;xbjlib-1.1.1.jar;lib&#92;xercesImpl.jar"apps.InstallTest.InstallTest

Return code from process: -1073741510

To copy this text to the clipboard, right click thenchoose

? 'Copy DetailsTo Clipboard'

CompletedTemplate

?

???

[Non-text portions of this message have been removed]