Hello,
Having had many difficulties using DCC++, inasmuch I cannot
operate servo turnout controls regrdless of settings etc.,
I have the possibility of aquiring a very cheap Lenz Compact.
Having borrowed the unit over the weekend, along with an
XpressNet interface (USB) from someone else, to test, I have found
a problem I cannot understand.
Basically, things work as I expect. Points (turnouts) operate
correctly (using various Arduino based servo controllers. Not a
problem there as I wasn't able to get that far with DCC++).;
Problem I have is with Throttle:
- Slider control drives loco OK
- Forward/ Reverse OK
- F0 lights OK
- BUT if I hit stop button, nothing happens
- HOWEVER? if I hit idle button loco stops.
- Loco stops , but not with decelaration expected after coding
using DecoderPro.
Any thoughts would be welcomed ASAP.
- Win 10 JMRI version 4.12+Rb6a9bb1
- Java version 1.8.0_181(en_GB)
Also same issue with JMRI/RaspPi (per Steve Todd's
RPi-JMRI.20180927) i.e. stop/idle issue
Thoughts and comments would be greatly appreciated.
Many thanks in advance
Tom
