Hi Steve,
Results!!
I took your advice and separated all 5 points and the crossover into seperate blocks and each its own section. The crossover is now a level crossing as well.
ive also added a few extra smaller sections around the layout, and now using Safe Sections. This seems to be working now.
I auto-generated my SML and then manually built my sections.
Because I don¡¯t have any more detection circuits, I¡¯ve done some logixs that trigger based on one sensor and the state of the turnouts, which triggers internal sensors that the blocks are assigned to. A seperate conditional for every possible train movement exists, as well as an ¡°off¡± conditional.
The crossover is on an auto-reverser on one detection section, and the outer rails of it are on another detection section. I have made a Logix for this that if either of them are triggered it triggers the internal sensor for both blocks of the crossover.
I thought about adding extra virtual signals, however if I added any between real signals it might detract from the realism of a yellow before a red on the real signals.
signals 1 through to 24 are real signals, all others are virtual due to not being visable.
Ive only tested this virtually, and I will report back tonight on the results of trains runnning. In theory I end up with 4 trains running around each other!
--
Thanks
Mitch
