开云体育

I have numerous frequencies in all five memory banks. Using the PBT/M-ch knobs (with PBT disengaged-green light out) I can select channels turning the outer knob but I can no longer select banks with the inner knob which worked previously. I have read through? the manual on this subject. I can go into the menu with the frequency/bank list and change banks that way.

I am wondering if I have inadvertently changed a setting somewhere that is causing this problem with not being able to use the knob to select banks.

Thanks for any info,

Michael Gardner
K1MLG

On Feb 15, 2024, at 6:47 PM, Steve Murphy <KC4SM@...> wrote:

?I've only ever been able to change banks through the M2, MEM, LST, BNK menu. With the PBT LED off the small knob is M-ch and the outer knob is RIT. I'm not aware of a menu setting that changes the functionality of these controls.

However, if you are using the HM-151 microphone you can configure the F-1 or F-2 soft keys for the BNK function.

73
Steve
KC4SM

Feb 15, 2024 4:59:00 PM Michael Gardner via groups.io <mlgardner96@...>:

I have numerous frequencies in all five memory banks. Using the PBT/M-ch knobs (with PBT disengaged-green light out) I can select channels turning the outer knob but I can no longer select banks with the inner knob which worked previously. I have read through the manual on this subject. I can go into the menu with the frequency/bank list and change banks that way.

I am wondering if I have inadvertently changed a setting somewhere that is causing this problem with not being able to use the knob to select banks.

Thanks for any info,

Michael Gardner
K1MLG