开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Ic7000
  2. Topics

IC-7000 / Clipperton-L Linear

 

Anything special about connecting a IC-7000 to a Clipperton-L Linear?
 

开云体育

Ed,

I don’t have specific information, but an area of concern is the IC7000 circuit that switches the amp from stand-by to operate. ?The voltage/current requirements of the amp might exceed the capacity of the IC7000’s switching circuit. ?I suggest looking at both manuals to verify the requirements!

Robie AJ4F?

On Feb 10, 2025, at 09:15, Edward Luers via groups.io <eluers2@...> wrote:

?
Anything special about connecting a IC-7000 to a Clipperton-L Linear?
 

The IC-7000 has very small relays that do the switching and they are hard to change. I used the MFJ ARB 704 interface box with an Heathkit SB-200.
 

Thanks.

Ed KE6SU

On Mon, Feb 10, 2025 at 9:03?AM R Elms via <ruler552003=[email protected]> wrote:
Ed,

I don’t have specific information, but an area of concern is the IC7000 circuit that switches the amp from stand-by to operate.? The voltage/current requirements of the amp might exceed the capacity of the IC7000’s switching circuit.? I suggest looking at both manuals to verify the requirements!

Robie AJ4F?

On Feb 10, 2025, at 09:15, Edward Luers via <eluers2=[email protected]> wrote:

?
Anything special about connecting a IC-7000 to a Clipperton-L Linear?
 

The 7000 manual says for an amp relay not to exceed 16 volts?@ 200mA. I did work on a Clipperton a few years?ago.
I don't?remember the current draw but I do remember it was more than 16 volts so you do need some type of amp
keying interface.
Bob W4JFA

On Mon, Feb 10, 2025 at 10:15?AM Edward Luers via <eluers2=[email protected]> wrote:
Anything special about connecting a IC-7000 to a Clipperton-L Linear?

1 - 5 of 5