开云体育

I realize I'm going to draw all kinds of flack for this one but does anyone no where I might obtain an interface cable to enable using a Kenwood AT-250 tuner on a 7K?? Scematis that I might build my own with?

Thanks Guys!

W5JEP

Jerry Palmer

?

Sent with my Jedi Mind Tricks!

I don't know why you'd catch flack for it.

Here's a link to a manual for the AT-250.?

As far as I can remember, you only need to interface the AT-250 if you want it to track what band the radio is on. ?That might be an issue - again, as far as I remember, that only functions with Kenwood rigs, and really only works well with the TS-430. ?Fig. 3 in the above-referenced manual shows the pinout for the control jack on the back of the AT-250, but heaven knows if the band data supplied by the IC-7k will be understood by the AT-250.

Note the AT-250 will do everything else it's designed to do - switch antennas, automatically tune - with any rig, so long as you reach over and flip the bandswitch to the desired band. I had a complete TS-430 station some years ago, and it worked FB.

Vy 73 de Bob WP2XX