开云体育

I just replaced my Mobile vehicle from a 2000 Ford F250 to a 2012 FORD F350. Went through all the right moves to set up my IC-7000 from one truck to the other....
Problem being I had to use a Hair Dryer to remove the MB-65 Mounting Base now... I desperately need a new Stick it down super sticky pad for the MB-65 and I see the MB-65 has been replaced with an MB-120. ANYONE found a suitable base replacement or sticky base material that actually works. I tried 3M Auto Body Molding Tape and it lasted until the vehicle dash warmed up....DARN

Sure could use some advice here...I'm sure I'm not the only one who has moved their trusty IC-7000 to another vehicle.

73
GARY

--- In ic7000@..., "w7fsi" <ggadwa@...> wrote:

Sure could use some advice here...I'm sure I'm not the only one who has moved their trusty IC-7000 to another vehicle.

My wife is a sign maker and I used the double sided tape she uses to fix signs onto stuff. Find a local sign shop and see if you can scrounge 6".

The product to use is 3M VHB. That is what ships with most mounts for this type of application.

Amazon has some smaller rolls but the larger stuff can be very expensive especially when you only need a couple of square inches.

VHB stands for very high bond and is used to hold gps mounting plates etc to vehicle dashboards. They even use it to hold trailer panels to frames!

Hope that helps.

Sent from my mobile device.