On Fri, Jun 26, 2020 at 8:31 AM, Albert Marsh

<hitekgearhead@...> wrote:

I saw this article come through my email this morning, and in light of recent toaster oven discussions I thought I would share it with you guys.



-Albert
KI4OI

I have and still prefer a dedicated pid controler with ramp/soak such as the auberins.com SYL-2352P or equivalent from Amazon. Simple to set up? and does the job without the complexity of programming a multipurpose microcontroller.?

Also I just open the door manually too at the end of the cycle, after all I'm not flowing PCBs 8 hours a day , more likely? once a month.?

A cheap but newer model toaster oven with quartz elements and good insulation on the inside + front and back follows? a profile nicely.?

Chaz?

On Fri, Jun 26, 2020 at 8:31 AM, Albert Marsh

<hitekgearhead@...> wrote:

I saw this article come through my email this morning, and in light of recent toaster oven discussions I thought I would share it with you guys.



-Albert
KI4OI

I LIKE THIS ELEGANT SOLUTION!!!!!!??? THANK YOU!!

Dirt cheap and everything you need is already here if you have an ARDUINO experimenter kit which comes with servos
and... thermistors are sold by AMASON ... pack of 5 for $13.

???

On 06/26/2020 09:00 AM, chaz via groups.io wrote:

I have and still prefer a dedicated pid controler with ramp/soak such as the auberins.com SYL-2352P or equivalent from Amazon. Simple to set up? and does the job without the complexity of programming a multipurpose microcontroller.?

Also I just open the door manually too at the end of the cycle, after all I'm not flowing PCBs 8 hours a day , more likely? once a month.?

A cheap but newer model toaster oven with quartz elements and good insulation on the inside + front and back follows? a profile nicely.?

Chaz?

On Fri, Jun 26, 2020 at 8:31 AM, Albert Marsh

<hitekgearhead@...> wrote:

I saw this article come through my email this morning, and in light of recent toaster oven discussions I thought I would share it with you guys.



-Albert
KI4OI

I have and still prefer a dedicated pid controler with ramp/soak such as the auberins.com SYL-2352P or equivalent from Amazon. Simple to set up? and does the job without the complexity of programming a multipurpose microcontroller.?

Also I just open the door manually too at the end of the cycle, after all I'm not flowing PCBs 8 hours a day , more likely? once a month.?

A cheap but newer model toaster oven with quartz elements and good insulation on the inside + front and back follows? a profile nicely.?

Chaz?

On Fri, Jun 26, 2020 at 8:31 AM, Albert Marsh

<hitekgearhead@...> wrote:

I saw this article come through my email this morning, and in light of recent toaster oven discussions I thought I would share it with you guys.



-Albert
KI4OI