开云体育

I tried an experiment making a "scribe nozzle" for my Ender 3 FDM printer.? Raw pcb stock coated with Dykem layout fluid/laquer was scribed, then etched in Ferric Chloride.? This was mostly a

Cant buy sulphuric acid in the UK now - been told that sodium bisulfate solution is almost as good. Dave

Nah - why do it the easy way ;-)

You tube. Lots of stuff. You will need power sulfuric acid and? I believe lead.Sent from my Verizon, Samsung Galaxy smartphone

Check Caswell first: https://www.caswellplating.com/anodizing-products.html to get an idea of whats involved and the cost. Then check youtube for some other cheaper methods:

I have made a box for a pcb I have created that needs screening but the plain aluminium look is a bit boring and prone to scratching. A friend suggested anodizing as it toughens the surface and he

You can build one from scratch: https://www.youtube.com/watch?v=JWUJtmgh55M Regards. El miércoles, 27 de noviembre de 2019 3:17:38 p. m. GMT-5, chaz via Groups.Io

Check Proto advantage http://www.proto-advantage.com/store/

Hi Jim, ? You could try making them yourself. https://www.youtube.com/watch?v=W-FXD6zQ60g https://www.youtube.com/watch?v=JWUJtmgh55M Dave

I cant remember the cost as it is more than 2 years old.

Once I bought a BGA repair station i got 2 steel sheets of many patterns' stencil. see the photos [image: 20191127_135455.jpg] [image: 20191127_135337.jpg]

a little trick i use is to flux a whole row of pins…..line the part up and tack solder two opposing corners to line things up….then run a bead along the whole row WITH THE PCB TILTED ALMOST

Can anyone direct me to a supplier for smt IC templates that is reasonable?? I found one supplier but they wanted $80 for a small SOIC8 template.? I know that if I order pc boards from a Chinese

The laminator is Muro Diamond Laminator, rated at 700W; it weighs about 13kg / 30lbs. It doesn't appear to be a very common model, I suspect it's rebadged for Muro.

OK guys......?? I do agree.... we all chased another solution instead of a laminator....... BUT I asked the question "Have any of you found a cheap laminator that does toner transfer in one

I as well went back to the iron method. Much quicker and more satisfactory results. One thing I did was look at the msds sheet for the toner. I was able to get the melting point of the toner and use

I follow simple cloths iron in its max temperature. For lDt decade ir so not many failures unless the toner registration on the paper itself was bad.

Hi Rob, No matter how hard I pressed, with a flat plate I could not get good, even transfer. So I used what seemed most logical to melt toner - a fuser unit from an old laser printer or copier. One

I learned about toner transfer and laminators 20 years ago before I owned a laser printer. I bought a "good" laminator and then followed the instructions to modify it to be a higher temperature of?

I am using different methods for toner transfer: Toner-Transfer-Methode - Layout auf eine Platine übertragen | | | | | | | | | | | Toner-Transfer-Methode - Layout auf eine Platine