开云体育

--- Brian Pitt <bfp@...> wrote: Very brave, foolish, or got an old cheap laser printer. ;') Foreseeable, I suppose, as the fuser roller is only sized to heat up at most a thick sheet of

Hi to the list! I usually hang out at the CAD_CAM_EDM_DRO list, but as I have been working towards using a CNC to "etch" a board, I thought I'd post a few comments here! Not that I'm anti-chemical

Hi Alan - We meet again ;-) I will be interested to hear how you get on - strikes me that generating an outline from Gerber is potentially non-trivial. Would love to make use of any results you

Maybe some thin heat resistant tape over the edges to protect the drum. Is that 1/4 Oz board from Digikey? Look for printers that say something like "true straight-through paper path". Or dig

Hi Tony! Yes, surprise, surprise! To do the outlines from a Gerber file, I build a table of nodes (typically the pads), and add connection data to each entry. the connection data is the number of

Hi everyone I thought I might share how I have been making circuit boards for years. I have made 1000's of boards using a method that some do not like but I have had excellent results with. First I

I'm familiar with "DXF" files...Autocad right? I've been using auto cad for years. This is my first time using it for PCB layout. I've been trying to get a menu set up within the program to add

Hi, Don't you now any links to sites that explain this with pictures? and do you know where to buy equipment to do this? Thanks for the many replies :) made "screen" polyester is board. The and

I wonder if toner would make a good solder mask, used this way? Obviously you can't coat the whole board, but just leaving it on the traces and cleaning it off the pads could be a great idea. Hmm...

This is a copy of an E-Mail I sent to CAD_CAM_EDM_DRO a while back. I thought It might be usefull to someone so I am reposting here. Chris Much like others are describing. After a week or so of

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Homebrew_PCBs group. File : /setup.exe Uploaded by : hightechsystems1

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Homebrew_PCBs group. File : /PCB Software/PC Logic/manual.pdf

Is this shareware, freeware, or a crack? Just a caution to everyone, always run your virus checker on anything you download and remember that you still run them at your own risk. And if anyone ever

No way.... It would melt right away and make a mess.. Best regards, Alexandre Guimaraes

writes: AMEN!!!!!!!!!!!!!

And if it's a demo what's the limitations? is it crippled in any way? I think we should know this before we waste our time to download and then see that it's not of any use to us. regards victor

Hi Bob, Yes, the DXF files are a good export file for such work. You may also be able to use .PLT (plot files). I don't know about new menus in Autocad, I intend to do board design in Eagle. Alan

I don't do crack. It is a demo the only limit is no save but you can print, export to cam, metafile, bmp. Has auto router, easy to use interface, will export nc file and Gerber and many more features.

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Homebrew_PCBs group. File : /PCB Software/PC Logic/Demo limitations and

www.simtel.net/pub/pd/25092.html I happen to be at the simtel site and ran across this. I know there has been a discussion about converting pcb layouts to gcode for cnc milling. hope this is of