¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Hammondzone
  2. Topics

fitting leslie to Hammond C2

 

Hi Guys,
My latest Hammond is a C2 and it has a AO10c
Im fitting a 760 to it through a 9 pin control centre kit.
Its eveident on the kit which wires go to where but only 90% sure of the connections on the amp.
Anyone help?
 

¿ªÔÆÌåÓý

G is tour your rotary signal
Amp chassis is your ground
Take power from behind the generator?


On Sep 25, 2018, at 14:17, Adrian Rose via Groups.Io <madorganplayer@...> wrote:

Hi Guys,
My latest Hammond is a C2 and it has a AO10c
Im fitting a 760 to it through a 9 pin control centre kit.
Its eveident on the kit which wires go to where but only 90% sure of the connections on the amp.
Anyone help?

 

To expand on Wes' reply, either of the G outputs can be used for the rotary audio signal input to the Leslie. I believe I put a spade lug on my ground wire and put it in between one of the amp chassis mounting screws and the chassis itself. A star washer would help make sure you have good ground continuity since the chassis is painted.

1 - 3 of 3