Question about HV transformer

GGLL #37004 Thanks Lou. I did a search based on component ID's, and found it was a LPA-2 amplifier, from TMC. Two 8163 triodes. Unfortunately, the manual lacks the schematic, but the power supply is quite similar to LPA-1KC model (TMC also). Many thanks Regards Guillermo - LU5WE. toggle quoted message Show quoted text El 18/11/19 a las 18:31, Gudguyham@... [ham_amplifiers] escribió: ? Sounds to me you would get around 3300 volts DC after a doubler rectifier. ?The .3A is probably a CCS rating so at ICAS that’s probably good for .6 amp. ?In an amplifier running two 3-400 tubes that would be an input power of about 1980 watts and probably 1100-1200 SSB would be my guess. ?Lou Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com <> On?Monday, November 18, 2019,?GGLL guiye8@... [ham_amplifiers]?<ham_amplifiers@...>?wrote: ? GA, I took out the HV transformer (from an old commercial PA, burnt beyond practical repair, which I guess was for twin triodes 3-400z style, at least based in the sockets used and the filament transformer which is a 10 VAC CT, 15A one). This HV transformer has two primaries (115 VAC each, 50-60 Hz), and one secondary which states 1200 VAC, 0.3 A DC Doubler How should I estimate the transformer ratings, in terms of power capabilities?, I don't understand the meaning of that stated current value. TIA Regards Guillermo - LU5WE.

开云体育