开云体育

Hello Francois; Here is one: https://www.dxengineering.com/parts/ect-2t-gen 73 Tim K3LR Sent: Friday, January 17, 2025 11:06 AM To: ham-amplifiers@groups.io Subject: [ham-amplifiers] Two

Hello Do you have any recent experience of buying a generator of this type. Please send me references of such a product. Thank you -- F1AMM Fran?ois

The relay control on the GM3SEK board became messy when using tetrodes or triodes with handles. There was also external parts that there were not documented? that had to be added externally for

Yes. I bought the complete WD7S kit years ago and then decided that it was much simpler to include the features that I wanted in my amp constructions without the board. I still have it here, as I

For simple GG triodes,? do u really require a triode control board ?? ?The step started HV supply, and step started? fil supply can be done? without the triode control board.? ?Ditto with grid

Mine are? the model..... ODC-15A? ( 15 vdc input side, and a huge plus / minus range)? ?and are rated for 250 vdc @ 1 amp on the output side. The other version is called a ODC-15, and output side

Alan, Jim, I sure like that. I downloaded the datasheet. I'll look more into these. Thanks! Bob W4JFA gmail.com@groups.io> wrote:

On Tue, Jan 14, 2025 at 07:05 AM, Jim VE7RF wrote: > > I used an opto-22? ?opto isolator.? You can get em in 5 vdc.....15 > vdc...and 24 vdc? on the input side....... (and each of those 3 x >

WB2FKO said: "Keeping with GM3SEK's original design philosophy, the boards could be re-engineered with a modern microcontroller that could also implement a versatile sequencer function, thermal

Henry 2K-3 Bob W4JFA <bob.herendeen@...> wrote:

Jim, Thank you. When studying this, most optocoupler diagrams show 3 connections, VCC, OUT, GND/NEG. For amplifier keying there's only two wires, POS and NEG which need to be connected to key the amp.

I used an opto-22? ?opto isolator.? You can get em in 5 vdc.....15 vdc...and 24 vdc? on the input side....... (and each of those 3 x different input vdc's is nominal...... IE:? u can go a LOT

Just wondering Bob, what kind of amplifiers do you have?

That's ok. I got it working. These interfaces have a few advantages. It uses the 12 volts from the radio as long as I stay below 10 mA. 12 volts on transmit from the Kenwood's DIN accessories jack. In

I have a set of tetrode boards on my GS23B amplifier and understand the design pretty well. Their primary functions are voltage regulation and screen current trip, which has saved me countless times

Thanks for that insight, Reid. With all that being said, the electronic methods for control and protection of triode and tetrode amplifiers haven't changed....Ian's circuits, from an electronics

I was reminded there is another source for boards to use with a triode OR tetrode, one built in France A couple of years ago I was in a discussion about using one of them on a larger tetrode in

I contacted a friend of Ian's and he dialed him up and asked to comment on the subject at hand. Ian said he basically was unable to help, here's his reply "There have been a few inquiries about

My Fault Bob, I thought you had an HL-2200, that is Rons comment. Sorry for the confusion. Bob N9NRW

You could just use the sb-220 softkey circuit and eliminate the need for the external power. I stuck it on a strip board.