开云体育

ORIGINAL MESSAGE: <w4zt2007@...> wrote: ------------ REPLY FOLLOWS ------------ Not on RTTY? Bill, W6WRT

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ham_amplifiers group. File : /YC-243.pdf Uploaded by : pentalab

<TollFree1800@...> wrote: when it hits the pair of 4CX15000's, they can take being driven by 15,000 watts. ### I take it they run the 4 x 15's in GG.. with screen and grids all bonded to chassis ?

Another post shared. Thanks Paul, See that's the fallacy. There's no such thing as a metric moon. The metric system is based on an EARTH DERIVED distance. SO they are taking an earth based

Imperial dimensions were doomed after Michiel de Ruyter broke the Chain over the Thames at Chatham ;-))) Cheers, Dick PA3DUV

That's an even better reason to standardize on SCHMEDLAPS.

There trouble with gallons is that there are two kinds of 'em.

I see the moon is now metric: http://science.nasa.gov/headlines/y2007/08jan_metricmoon.htm Paul G4DCV Robert B. Bonner wrote:

There is a gentleman in Florida with a big block in the back of a van, moving I believe is 7 or 8 alternators. His ERP (out of the phased array) is close to quarter million watts. Another friend of

Pill: MRF455 looks like a small pill of aspirin. 192 devices are built as 3 64 device amplifiers, and then they combine them. Using a non linear amplifier produces distortion, unless your

Yeah I seriously thought of getting into that game myself at one time. What a way to make a living. I was going to take a suburban and remove the 454 and place a diesel 480v 3ph generation unit in it

<rbonner@...> wrote: ### anybody who doesn't know what a 3x3 is... well... they should go straight to their ARRL hand book.... where they still won't figure it out. ### Dunno where the 11m term

Typ metric to queens english and vice versa faux pas. Don't laugh.... a few commercial airliners went down cuz of a litre to US gal screw up. I have seen several containers made in the US..

wrote: 40cm DIAMETER on 80m. ### say what ?? 1 cm= 10mm 40cm= 400mm = 16" diam.. which is huge. ### IF u meant 40mm... that's only 1.6" the width of the S-meter needle in

That was a GREAT piece of work Bob! Too bad there so many that can't or wont buy into the simple things that make us smile. Q signals belong on CW... that's why they were invented ;) Roger isn't a

wrote: Verily, verily! they have eliminated all of the code, most of the theory, and now they are going after our "jive-talk!" I guess the "Q" signals will have to go next, and then they will

Yeah we had to straighten out a few of the guys on AMPS today. A touch of the professor's wisdom. BOB DD

wrote: coils, most dx #### I find this hard to believe. And 5" diam coil is pretty damn big.... like 125mm. Ur 80m mobile ant is still -9 db.... most 80m mobile stations and 500 w is bare

Anyone happen to know what was used to plate the chassis in Detron amps? I have one that has some rust at the seam on the front(behind the aluminum front panel) and thought I would clean it up and

Not all alternators are capable of charging 16-18 Volts. The factors that determine an alternators output are stator windings, stator/rotor spacing, rotor current and number of poles, and RPM.