开云体育

Here's the secret for 30m. 20m and 30m share the same slug and they are far apart in frequency. The advice I got from Ameritron is that you can tune for 20m OR tune for 30m. You can't have both. Make

Including the beer, count on four. If he only has coffee, it'll probly be just two? 8-) Steve, K0XP -- See my QRZ.com page at *https://www.qrz.com/db/K0XP*

W7RY?? Dunno whether he made such animals, but he did provide other animals for our zoos? 8-D Steve, K0XP

The 2 prior posts are a perfect segue into my question. My input SWR on 30 is over 3 to 1 and 12 meters is about 2 to 1. The rest seem ok. I have searched high and low for instructions on the proper

LOL! I'm gonna go there mid afternoon after work and was curious how long this will take. An hour, 2 hours, 4 hours??? Bob W4JFA [email protected]> wrote:

Depends on how much beer you are gonna drink. It's actually pretty simple from memory. 73, Alek.

Hi all, I'm going to help a friend replace the fan in his AL-80B amp. Is this an hour job or do I need to count on a half day or so? Thanks, Bob W4JFA

Sorry. I forgot the link. https://docplayer.net/52604578-Wd7s-productions-tu-6b-tuned-input-board-assembly-notes.html

No, you are right Mike. It was WD7S. Alek.

That call does not seem like the one I was thinking about. Seems it was W7__? __? ? I could be wrong.

I have the AT100 AMP board with the special PIC. I believe the chip is common but I don't think I know anyone that can copy them. 73, Alek VK6APK

W7IUV. Discontinued long ago. Alek VK6APK

Wasn't there a 7 call ham that made such a board? Think he also made high voltage boards.

I suppose the answer to that would be to disconnect power to the tuner after it's done its job.... Or rewire it so it only tunes when power is applied, then you remove power to keep it from

The amplifier version of the AT100 tuner has different stuff programmed into the PIC chip. 73, Alek VK6APK

I just bought two of them for $5 each at a local radio club auction, configured as coax-fed remote antenna tuners (RT-100 and RC-100, no longer sold) intended to be mounted at the antenna, complete

They stopped making that unit years ago. I tried using the at100 remote ldg. It decided to tune while I was transmitting. That was it. Smoked. C

Hi Tuner-Seeker W7WRX! I believe that LDG makes a board-size tuner just for amp builders. 7 Band, 9 Band, I'm not sure. But they advertise in QST. They've been doing that for years. Happy New Year

I am thinking of adding a tuned input to one of my amps.? Does anyone make a board?? I searched around and there seems to be nothing available. Does anyone have a board laying around?? Maybe from

What negative voltage ranges should a find in this amplifier’s ALC circuitry? I know it depends on the setting of the pot. Just curious about what variation I should see. Richard WB5NEN