开云体育

Yes, of course.. Dick... senior moment there.. Those heady days of the mid-70's thru the 80's were great times for VM. I was the lead VM systems programmer at Home Savings at the time. We were running

Gregg Levine wrote: [...] I would have, but I was taking a nap and missed my opportunity. :) Besides, I've done much worse in my time. Very early in my career, I accidentally destroyed our sysres, and

I can present it as an example of documentation, a HOW-TO. Good will be in the eye of the beholder. ... Mark S.

Hello! Mark? That's a good one. Drew we all make mistakes. To really overdo things we need to be the computers we write programs for. Strange, I did expect a rather sharp piscine comment here. -----

Hello! I see that Mark. There's a good reason waiting for it. What say that when all of this is settled, and you've got the two systems seeing each other, can you present all of this as a good example

Does that mean it could give itself instructions independent of a human? ;-) ... Mark S.

Bob, I added XNET to AUTOLOG1 and it is running disconnected. I can dial XNET and get the menu, and choose a system, but it does not connect. XNET - Cross System Net ? ? ? ? ? ? VM370P01 - 0C8

Bob, Thank you so much for your patience! I now have a two node XNET working!! I also rebuilt CP so the SYSID name matches the NODE name. I'll need that (and fixing SYSTEM NETID) for RSCS. ... Mark S.

On Sat, 17 Aug 2024 at 03:16, William Denton via groups.io Yes, Lynn was one of the greats among many... > [...] We were also working with Dave Newsome Dick? Tony H.

Pro Tip: Don't add a typewriter console to DMKRIO and then tell Hercules that device address is a card reader. The combination sent a VM SIXPACK system from 1% host CPU to 100% host CPU, and

Hi Mark, I found the problem.? It is in your XNET configuration.? I completely missed it before.? Here is the problem, and it is in the CONFIG file for VM370DEV only.? The CONFIG for VM370-01 is

See Bob's response. I never talked to him, but heard much about him at the few SHAREs I was able to attend. Ran into his e-mails on a discussion list and he referenced the web site. AMAZING! ... Mark

Lynn Wheeler's musings are online and available to everyone.? Here is the URL: https://www.garlic.com/~lynn/ The newsgroup postings is where a lot of the good stuff is, particularly the older ones.?

Hi, My first job out of college was with Texas Instruments. I chose TI for two reasons: 1) It was my understanding the BSEPP and SEPP work were done at TI main site. 2) The job was to be the first and

Mark... Yes, Lynn was one of the greats among many... we collaborated on the scheduler changes that ended up in SEPP based on some the observations my shop was seeing trying to run a large interactive

It is important to remember, we are playing with an operating system from the late 1970s through early 1980s, about 40 years ago, which IBM got no money for developing. It only aided in hardware

Does the SYSID in DMKSYS *have to match* the NODE value? ... Mark S.

I rebuilt Hercules on both systems via hercules-helper, removing any prior versions of 3.x or 4.x leaving only the most recent 4.7. [xmas@vm370dev ~]$ which hercules /usr/local/hercules/bin/he

William, It seems to me that you are misunderstanding how to use the alternate nucleus arrangement. First off, DMKSYS is a table of parameters; the resulting assembly doesn't contain any code. If you

Hi Mark, Ok, I think I see the problem.? You are reusing the same port numbers on your CTCE definitions in your Hercules configuration.? They need to be unique, by CTCE device. For example, you have