开云体育

Hi U need to click "Full" in the display control panel next to the power controls. OK ? 73 Peter - GM8JCF

G8JCF SDR in Windows 10 shows only half of the software panel - settings panel can not be seen. Please advice.

Thanks, Peter! I’ll try the workarounds, however I am looking forward to what you will come up with for the next release! 73s Joachim Von: [email protected] [mailto:[email protected]] Im Auftrag

Hi Joachim Understand about the frequency dial issue. For fixed frequency CW stations, eg RWM and NDBs, I use USB, and set the dial frequency to the official frequency -500Hz, so that the signal falls

Thanks very much, Peter, for your quick and detailed reply. Of course you are absolutely right and one can use USB and respective filter settings to make the CW signal audible, however, you always

PS, Here's a more detailed? screenshot of an actual CW receiving configuration Note I have zoomed up the spectrum display to show the CW signal more clearly within the passband - see Sweep settings.

Hi Joachim The DRT1 is really excellent as U know !! To receive CW with the G8JCFSDR, select USB mode, select 2.2KHz bandwidth, tune in the CW signal, so that its tone is around 800Hz or whatever U

Hi, list, I've owned a DRT-1 back in 2007 and successfully used it together with the G8JCF-SDR-software. I sold it half a year later and was regretting that soon. When I found a cheap DRT-1 on ebay

Hi Nikos Any news to report ? 73 Peter - GM8JCF

When U start up G8JCFSDR, U should see this splash screen and also on the main G8JCFSDR screen in the top left corner 73 Peter - GM8JCF

Hi From the log file, it appears that U are running build 281, "0:00:00:046 frmSupervisor.Initialise : app.Revision=281", however the date of the log file shows 12/20/2019 Time=2:17:12 PM which is

OK clicked maybe 20 x and it finally came to life. Now I know / thanks / I'll report after some testing

Herewith log file

Hi When U say "keeps reappearing", how many times did U click OK before U decided to kill the process with task manager ? I'm asking because U may have to click OK 3 or more times to get to the

282 !! I'm surprised that U are having a problem, but we'll see more info from the trace file 73 Peter - GM8JCF

will do. 282

Hi Could U please run the G8JCFSDR in TRACE mode and send me the logfile. Also which version of the G8JCFSDR are U running ? Build 282 has much improved serial port error handling 73 Peter - GM8JCF

Error about wrong port (3) but cannot change as the program does not run, so no way to configure it to the actual port number (14).? Error message does not allow exit, keeps reappering until killed

PS, if U already have a standard 1602 LCDs, then U can just order an I2C adapter, eg

:-) :-) lol